• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

LCB/ Headers clearance issues?

Aggudabbu

Senior Member
Offline
I've been on and off lately to put the last hand on my engine upgrade and fit an LCB manifold on my engine, but I'm a bit concerned about clearance with the steering shaft on a left hand drive car, if I should buy for example a moss or a maniflow system, since from what I've interpreted there made for UK market cars...So would they fit straight on or would they need to be modified?

//Alex
 

drooartz

Moderator
Staff member
Gold
Country flag
Offline
I've got a Maniflow LCB in my LHD bugeye. Adequate clearance for the steering column, but you may need to open up the hole where the header passes through the frame. I had to grind that hole open a bit to make adequate clearance.

I was able to get the header in place without pulling the motor, but it was a tight squeeze.
 

drooartz

Moderator
Staff member
Gold
Country flag
Offline
There was one brand of LBC that was a 2 piece design--can't remeber who right now. Split right above the 90 degree bend. Had I to do it all over I would consider that one as it would make removal/install much easier.
 
Similar threads
Thread starter Title Forum Replies Date
Jim_Gruber Thoughts on stock '69 1275 manifold vs LCB Headers for street use Spridgets 9
C LCB header with 1500 single carb inlet manifold Spridgets 1
ncbugeye Makes you want an LCB Spridgets 11
3 Exhaust Manifold/Headers BN2 Austin Healey 16
steveg Headers to buy - DW or AHspares? Austin Healey 5
RAC68 Home Made Healey Exhaust Headers from a BOX Austin Healey 15
R General Tech Kirk Racing headers opinion Triumph 3
Bremer TR2/3/3A 4-2-1 headers [or Tri-Y] Triumph 5
R TR4/4A Were the exhaust headers painted on the TR4's Triumph 6
D Headers for BN4 Austin Healey 2
Morris Good Deal on Cheap Headers Spridgets 6
T TR6 TR6 [?] headers - actually any good? Triumph 7
bighealeysource Derrington style exhaust headers on 100-4's Austin Healey 4
58Custom A14/A15 engine users: What yall using for headers? Spridgets 11
racer_x Wedge TR8 Group buy- Kirk headers Triumph 5
racer_x Wedge TR8 Headers: Rimmers versus Woody/TSI Triumph 34
JPSmit Patriot Headers Spridgets 1
LuckyLuke Who makes exhaust headers for AH 3000 BN7 Austin Healey 7
W TR6 TR6 aftermarket headers Triumph 26
hymodyne GT6 GT6 headers Triumph 14
KVH TR4/4A Tubular Headers/Pertronix for TR4 Triumph 12
NardisCNC Who makes the best headers?? Spridgets 9
drooartz How the *bleep* do you fit the headers? Spridgets 11
RSMTR8 Wedge TR8 Headers Triumph 13
GBRandy Wedge Headers on a FI TR8 Anyone do it? Triumph 9
5 Headers for BN4/early 3000 Austin Healey 10
drooartz Jet-Hot headers came today! Spridgets 5
boeingpilot GT6 GT6 Headers Triumph 3
tony barnhill Patriot 1500 Midget Headers Spridgets 3
A new headers Austin Healey 3
chrisc Wedge TR8 Headers/Exhaust Triumph 46
G I called Jet Hot about my peeling SS headers... Triumph 20
amcboy Headers, and what I intend to do about it.... Triumph 4
G Jet Hot coating peeling off my headers........... Triumph 9
T tvr 2500 headers TVR 0
Darrell_Walker Headers/exhaust manifolds for 4 cyl TR with Webers Triumph 12
73MidgetLigon Wrapping your headers is it worth it? Spridgets 11
S headers ? Triumph 20
G Catalyst location for a car with headers Spridgets 17
DNK E bay headers Triumph 0
G Removing my engine/tranny with Headers.... Triumph 4
T ok, lets talk about headers Triumph 9
T TriumphTune Exhaust Headers? Triumph 23
A TR6 Headers --VS.--Stock header??? tr6 Triumph 32
Brosky Pacesetter Headers Yes or No? Triumph 13
kodanja TR6 71' TR6 HEADERS Triumph 6
T TR4/4A tr4 headers-sizing Triumph 1
C Don... Those Headers? Triumph 11
M 'Kirk Racing Headers' need feedback Triumph 2
beez ceramic coating on headers Triumph 14

Similar threads

Top