Rubber seal installation?

[CraigLandrum]

OK, I managed to figure out how to install the rubber trunk seal, but can't seem to puzzle out how to install the seals on the spare tire area - does it go on the body or the lid? How about the hood seals (I bought clips).

I will eventually ask about door seals and furflex, but didn't want to stress out all you nice responders

 

[Twosheds]

OK, I managed to figure out how to install the rubber trunk seal, but can't seem to puzzle out how to install the seals on the spare tire area - does it go on the body or the lid? How about the hood seals (I bought clips).

Body.

I didn't know the hood has a seal, so I can't help you with that.

 

[TR3driver]

That reminds me, the spare tire seal I got from TRF the other day is the wrong one. I need to call them and return it.

It goes on the body, glued into the channel with something similar to 3M weatherstrip adhesive (affectionately known as Gorilla Snot).

 

[Geo Hahn]

Ditto on hood seal -- do not know what that is (whether you mean hood in the British sense (the top) or in the American sense (bonnet)) either way... I see no seals here.

 

[martx-5]

The spare tire lid seal I got from Moss was just too fat. I couldn't get the lid to line up properly. My car will only see rain on very rare occasions (like I get stuck in a sudden downpour), so I just eliminated it for now. Maybe the one from TRF is the same as I got from Moss...doesn't fit right.

The boot seal was fine, and I didn't even have to glue it in place. There are two types for the trunk. The early type fits inside a channel and the later type fits over a single riser...that's the type I have. I don't know when the change occured, but probably at TS60,000.