Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I want to get ideas of how to dress the engine bay. I also want to ditch all the emissions junk. So lets see what you did. I'm mainly considering if I should powdercoat parts, get chrome or black engine dressings, dual carbs, etc.... so post your favorite engine pics....
-
The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
-
Hey there Guest!
If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.**Upgrade Now**
(PS: Subscribers don't see this UGLY banner)
Lets see your engine bay
- Thread starter bones
- Start date
Share this page
LastDeadLast
Jedi Knight
Offline
72 TR6: I've done a couple things.... /ubbthreads/images/graemlins/devilgrin.gif
frankenstang57
Jedi Warrior
Offline
You did say everything an' anything! /ubbthreads/images/graemlins/devilgrin.gif
aeronca65t
Great Pumpkin
Offline
Here's part of the engine bay in my 1500 Spridget.
This was taken to document the "emergency repair" we did (used Vise-Grips to hold on the carb when the upper stud failed during practice). It held on nicely for the subsequent 2 hour enduro.
Hard to see everything due to poor picture quality, but there is a header, heat-shield, cold-air hose, PVC plastic intake horn with "bug-screen" air filter and copper-tube crankcase vent, S&S single pumper carb, fuel-pressure regulator.
This is a "working" engine and it never looks pretty.
This was taken to document the "emergency repair" we did (used Vise-Grips to hold on the carb when the upper stud failed during practice). It held on nicely for the subsequent 2 hour enduro.
Hard to see everything due to poor picture quality, but there is a header, heat-shield, cold-air hose, PVC plastic intake horn with "bug-screen" air filter and copper-tube crankcase vent, S&S single pumper carb, fuel-pressure regulator.
This is a "working" engine and it never looks pretty.
jsneddon
Jedi Knight
Offline
Allright Bryan! - another "classic" engine bay!
I think others are just embarrased to show em.
as Frank Zappa said: "There's a lot more of us ugly people out here so you pretty people better watch out!"
/ubbthreads/images/graemlins/smile.gif
Not that I've got anything against a pretty engine - Some day.... Some day.... But I'm not afraid to show it and I'm certainly not afraid to drive it. It may be ugly but it's running like a scared rabbit right now /ubbthreads/images/graemlins/smile.gif
I think others are just embarrased to show em.
as Frank Zappa said: "There's a lot more of us ugly people out here so you pretty people better watch out!"
/ubbthreads/images/graemlins/smile.gif
Not that I've got anything against a pretty engine - Some day.... Some day.... But I'm not afraid to show it and I'm certainly not afraid to drive it. It may be ugly but it's running like a scared rabbit right now /ubbthreads/images/graemlins/smile.gif
Similar threads
Similar threads
-
Pushing the clutch lets idle speed drop until the engine stalls- Started by Lutz Kramer
- Replies: 18
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
G
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MGB while driving engine cuts out if I let off or push more throttle it comes right back on
- Started by BillyBob601
- Replies: 5
-
-
-
TR2/3/3A TS37903F Is my engine a TR3A engine because my starter says no.
- Started by geewiz
- Replies: 3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.