• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR2/3/3A TR3 Brakes pull to side

JFS

Jedi Warrior
Bronze
Country flag
Offline
Last year after thirty years of use, a front caliper on the TR3 finally leaked. I rebuilt both calipers with a TRF kit and the brakes worked fine for the summer. This summer the car pulled to the right, quite violently if braked hard at speed.
I bled the left caliper and the car still pulls to the right, but not as badly. I have used silicone fluid in this car for more than twenty years without a problem. I did not, however, replace the old brake hoses. I cleaned and reused the old caliper pistons and one pair was somewhat pitted. I will replace the hoses and rebuild with another kit, but am wondering if I should replace the pistons.
 

TR3driver

Great Pumpkin - R.I.P
Offline
Unless they are leaking, I doubt the pistons are the problem. IMO you are more likely to have contaminated pads or something wrong with the front suspension. Last time I had a TR3 that pulled violently, it turned out that one of the lower suspension pivots was broken loose from the frame.

To check the pads, just swap them from side to side.
 

Banjo

Yoda
Country flag
Offline
My first guess would be: pits are causing a leak, leak has soaked the inboard pad, and now it grabs. But you won't know till you do an inspection.
if there is a leak replace the pistons along with a fresh rebuild. If there is no leak, I'd first check that all the pads move freely, and the pistons move the same. Also check suspension joints like Randall said.
If all seems to be in order, my next thought would be hoses.
Lots of times its the hose on the opposite side of the pull getting blocked and not allowing that caliper to activate.
 
OP
JFS

JFS

Jedi Warrior
Bronze
Country flag
Offline
Thanks all for the input. Inspection of the front suspension showed my rebuild twenty years ago is still good, although some rubber parts not so good any more. Pads on the left were a bit wet, especially on the inboard side; pads on the right were dry. I cleaned all four pads and, switching sides, replaced them. Took the car for a test drive and the brakes worked very well; the car stopped in a straight line. I must have a leaky piston on the left side that wets the pad but is not severe enough to noticeably lower the reservoir.

I remember having a difficult time getting the rubber parts into the grooves when I rebuilt the calipers last year. Anybody have any tips on the procedure? I should probably get new pistons for the left side and replace all hoses as long as I'm at it.
 

CJD

Yoda
Country flag
Offline
If you had trouble with the seals, there is likely still crud and/or old rubber down in the seal grooves. You can scrape it out with a dentist's pick or similar sharp tool to get to bare metal. They will fit in easily once the grooves are clear.

John
 
Similar threads
Thread starter Title Forum Replies Date
S TR2/3/3A Triumph TR3 Tail Light Issue when Headlights and Brakes are On Triumph 15
T TR2/3/3A Hub Bearing Adjustment for TR3 w/Disc Brakes Triumph 3
mgedit TR2/3/3A Steady Springs Rear Brakes 56 TR3 Triumph 0
W TR2/3/3A '56 TR3 St 15000+ should have disc brakes... Right? Triumph 33
mgedit TR2/3/3A Banjo Connectors TR3 Brakes Triumph 4
S TR2/3/3A brakes 58 tr3 Triumph 0
mgedit TR2/3/3A Rear Drum Brakes 56 TR3 Triumph 2
mgedit TR2/3/3A Front Drum Brakes 56 TR3 Triumph 2
S TR2/3/3A rear brakes tr3 Triumph 1
tinman58 TR2/3/3A Toyota brakes on a TR3? Triumph 8
J TR2/3/3A '56 TR3 Brakes and rear axle advice Triumph 7
O TR2/3/3A 1960 TR3 Front Brakes Triumph 2
S TR2/3/3A tr3 brakes-Rear wheel Triumph 2
K TR2/3/3A TR3 9" versus 10" Brakes? Triumph 8
T TR2/3/3A TR3 Sticking Brakes - How come and what to do? Triumph 5
R TR2/3/3A TR3 Brakes Triumph 1
Moseso TR2/3/3A TR3 Rear Brakes -- A Bold Experiment Triumph 22
tinman58 TR2/3/3A Squeeeeeking Brakes TR3 Triumph 8
S TR2/3/3A tr3 front brakes hoses Triumph 9
S TR2/3/3A tr3 brakes pulling Triumph 3
prb51 TR2/3/3A TR3 Brakes and oil cooler question Triumph 8
S TR2/3/3A tr3 - 9 inch rear brakes Triumph 1
S TR2/3/3A TR3 rear brakes Triumph 12
R TR2/3/3A TR3 Brakes Triumph 8
mctriumph For Sale front apron 57 Tr3 Triumph Classifieds 0
Rick_Thompson TR2/3/3A TR3 rack and pinion kit problem... Triumph 17
S TR2/3/3A differential hubs early tr3 and tr2 Triumph 22
S TR2/3/3A Tr2 and early tr3 differential. Triumph 10
71TR6 TR2/3/3A TR3 WIper Wheel box Triumph 2
RonC General TR TR3 Shifter on TR6 Triumph 8
jfarris TR2/3/3A Modern Temporary Donut Spare for a TR3 Triumph 1
G TR2/3/3A What color is my car? TR3 1958 Triumph 16
S TR2/3/3A Rebuilding a tr3 transmission and second gear, Triumph 57
mctriumph For Sale Odd bit for Tr3 and early 3A Triumph Classifieds 0
S TR2/3/3A turn a tr3 non-full syncro transmission into a full syncro Triumph 3
Y TR2/3/3A I cannot get my TR3 in correct timing. Triumph 7
mctriumph TR2/3/3A Safety mods every Tr3 should get Triumph 12
Editor_Reid TR2/3/3A Whitewall Tires for TR3 Triumph 11
curdy TR2/3/3A TR3 Stalling Issues Triumph 8
S TR2/3/3A Anyone cut out the spare tire compartment on a tr3? Triumph 4
S TR2/3/3A put a differential back into a tr3. Triumph 2
S TR2/3/3A tr3 breather pipe Triumph 2
2 For Sale 1957 Triumph TR3 Small Mouth Triumph Classifieds 0
Jim_Stevens TR6 Barn find of TR6 and many TR3 parts Triumph 9
J For Sale 1958 TR3 Partout Triumph Classifieds 12
R For Sale TR3 Dash Triumph Classifieds 0
D TR2/3/3A Thread and size for tr3 fuel tank vapor line fitting Triumph 0
S TR2/3/3A Aluminum door capping for tr3 Triumph 12
tinman58 TR2/3/3A TR3 at Mammoth Lakes Triumph 4
G TR2/3/3A TR3 starter disassembly rebuild early M428G bomb Triumph 6

Similar threads

Top