Jim_Gruber
Yoda
Offline
I pulled the Temp Sensor out of Bugsy III's radiator and it works just fine. The metal spring however a broken right at where it attaches to the temp bulb. My thoughts to repair are;
1) a day or two in EvapoRust bath followed by a attempt to solder the spring back to the bulb housing.
2) will solder work?
3) solder type?
4) how to keep the bulb cool
Ideas gentlemen?
1) a day or two in EvapoRust bath followed by a attempt to solder the spring back to the bulb housing.
2) will solder work?
3) solder type?
4) how to keep the bulb cool
Ideas gentlemen?