I used floor panels and the trunk (boot) floor panel from Moss. Both fit well and the floor panels came with the caged nuts welded in place. The trunk panel I used was one piece and looked as though there was no way to get it in there without cutting the panel. After about a half an hour of twisting an turning, it all of a sudden just sorta fell in. I must have had too much coffee that morning. Please note, the trunk floors are different between pre and post 60k cars. Also, the floor panel from Moss did not have the "L" bracket(s) for the rear, Hardura panel or the tabs for the wiring harness. My car is post 60k, and I bought these items about ten years ago, so YMMV.