• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Ribcase slave cylinder

Share this page

ChrisS

ChrisS

Jedi Knight
Offline
I have the transmission out of my '73 to replace the straight cut gears and was thinking of replacing the stock slave cylinder with a 7/8" bore aftermarket cylinder. This should give more travel and get the clutch to release further from the floor. My question is has anyone done this and does it cause any interference issues. Thanks in advance.
 
Similar threads
Thread starter Title Forum Replies Date
TulsaFred 1275 Ribcase transmission in Bugeye - Which slave and pipe? Spridgets 23
N Ribcase transmission won’t engage 3rd or 4th gear Spridgets 19
N Sprite "Ribcase" Transmission Austin Healey 3
T Ribcase Shift Lever Installation -Bushing Spridgets 1
T Wanted wanted-- 1275 ribcase shifter and shifter seat cover if possible Spridgets Classified 0
J New Guy 948 ribcase question Spridgets 6
S Ribcase versus Ribcase Spridgets 1
AHS What speedometer gear is needed for a ribcase in a Bugeye? Spridgets 6
TulsaFred Starting Ribcase rebuild Spridgets 15
S Ribcase transmission needed - Chicago area Spridgets 2
DanLewis 1275 engine and ribcase transmission $750 [NFI] Spridgets 0
Rut Ribcase Spridgets 3
N Ribcase Ratio's Spridgets 8
Gerard Laygear thrust washer for ribcase gearbox Spridgets 5
L Ribcase transmission with 948 engine Spridgets 8
bugedd Thinking about rebuilding my ribcase Spridgets 16
D Best manual for ribcase rebuild? Spridgets 6
smaceng Ribcase rebuild help Spridgets 0
J Ribcase first gear hub Spridgets 2
drooartz Ribcase tranny - painted or bare? Spridgets 7
drooartz Checking a ribcase transmission Spridgets 2
58Custom Who sells best ribcase rebuild kit? Spridgets 6
drooartz Shipping a ribcase transmission Spridgets 17
64rocksprite Ribcase - all the same? Spridgets 4
drooartz Bugeye shifter on later ribcase Spridgets 3
Sarastro Question about ribcase trans and clutches Spridgets 9
T Ribcase Input/First Motion Shaft source Spridgets 2
ChrisS Ribcase split washers Spridgets 1
Prince_Phillip Rebuilt ribcase for sale. Spridgets 1
A Ribcase transmission Spridgets 0
K New Clutch Master/Slave Cylinder Austin Healey 1
A Rivergate slave problem Spridgets 3
wkilleffer MGB MGB clutch slave bleed driving me nuts MG 38
Popeye TR4/4A Slave rod seems too long but is not Triumph 7
K TR2/3/3A Clutch slave "return spring"? Triumph 3
K TR2/3/3A Clutch "Long Throw" Slave Cylinder? Triumph 4
K TR2/3/3A Clutch Slave Cylinder location when TR3 has a TR6 Gearbox? Triumph 16
WHT Remote Clutch Slave Cylinder Bleed Extension Austin Healey 11
BobHaskell For Sale Clutch Slave Cylinder Bleeder Extension Austin Healey Classifieds 13
BarryO TR2/3/3A setting up a TR3 clutch slave Triumph 5
R TR2/3/3A Bleeding the Slave Cylinder Triumph 118
Jim_Stevens TR2/3/3A Clutch slave hydraulic line Triumph 1
F TR2/3/3A Mounting Slave Cylinder Triumph 41
K TR2/3/3A TR4 motor with overdrive in a TR3 slave cylinder mounting position? Triumph 2
Jim_Gruber Pictures of Clutch Slave Plumbing with Gerard's Kit Spridgets 4
M General Tech TR2 Slave cylinder Triumph 0
R clutch slave cylinder Triumph 11
W Clutch slave cyl. Austin Healey 4
S XJ6 Mk1 clutch slave question Jaguar 0
K TR4/4A Hey CJD...gravity bleed clutch MC and slave? Triumph 6

Similar threads

Top