Hi all. My son and I bought a 71 Midget and after tearing it down I noticed brazing was done in the front frame on the drivers side between where the shock bolts on and the firewall. I suspect it might have been in an accident long ago but other than the welding there are no other signs. Are there any measurements that I can do that will help me find if the tub and frame are straight. I have searched for factory specs but can find none.
It was in poor shape but for $300 I had to grab it as a good learning tool.
thanks
Norm
It was in poor shape but for $300 I had to grab it as a good learning tool.
thanks
Norm