• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Bottom end of the market

bighealeysource

Luke Skywalker
Bronze
Country flag
Offline
Hey Bill,
Sure, you could just straighten out that frame, stick in a small block V-8 and have a Nasty Boy ! You could feature it in your articles on the values for big Healey's about how to lose money on a Healey project !!!
Mike
 
OP
L

Legal Bill

Jedi Knight
Country flag
Offline
^Exactly.

Wrench, I have no idea how to repair a frame. I would send the thing to Martin Jansen and ask him to fix the frame and body and paint it some two tone color scheme and then send it back to me for engine and tranny. I would install a Honda F22C motor and six speed tranny. 2.2 litres, 240 hp, 160 ft lbs of torque and an 8,000 rpm redline. The car would end up weighing a good bit less than stock. I'm sure that is what Donald had in mind.
 
OP
L

Legal Bill

Jedi Knight
Country flag
Offline
Front fender, front shroud and hood all look beat. The hood might be salvageable, but the shroud looks pretty bad. I'm not feeling it.
 

richberman

Jedi Warrior
Offline
Bill,
I know the car and it was kept as a perfect racer until the accident. My car is currently being assembled in the next building over from it. Any questions....I'm willing to answer what I know. The owner is my patient and a very nice guy! The frame dos need Marty Jensen's help!
rich
 
OP
L

Legal Bill

Jedi Knight
Country flag
Offline
Thanks Rich. It is now over $8400 and the auction ends in 3 hours. The price is too high and the time too short for me to do anything on this one. Best of luck to your patient and congrats to him on the sale.
 

richberman

Jedi Warrior
Offline
It is a nice car with no rust, but for sure it needs new frame, superstructure, fender, shroud. Then add the engine and trans and it's a bundle of money....more than it's really worth on the secondary market. nice car for someone who wants a racer and isn't counting their money.
rich


SOLD for $9650....
 
Similar threads
Thread starter Title Forum Replies Date
drooartz MGB Talk to me about bottom end bearings MG 34
T What/how to inspect an engine bottom end Triumph 7
Hap Waldrop Ray's bottom end Spridgets 5
eejay56 Mayem in the bottom end Triumph 6
prb51 TR2/3/3A TR3 Bottom End bearing change Triumph 15
G TR6 TR6 Bottom End Work Triumph 8
M 1725 Bottom end questions Sunbeam (Rootes) 1
jsneddon TR2/3/3A Where did all my TR3 bottom end power go? Triumph 6
C MGB Re strapping a MGB seat bottom MG 2
algot1901 1950 Prefect E93A-946480 - door bottom rubber Other British Cars 14
algot1901 Rear Seat Bottom/Frame for 1950 Ford Prefect Other British Cars 12
I TR6 TR6 - Fuel leaking from bottom of Evaporator Canister Triumph 11
A TR2/3/3A Interior rear panel covering gas tank and rear seat bottom install. Triumph 7
S TR2/3/3A bottom of the grill screws Triumph 3
D Wanted BN1 LH Seat Cushion [Bottom] Austin Healey Classifieds 0
B Wanted WTB: TR3 Late model-"Round bottom" door Triumph Classifieds 4
CinneaghTR TR4/4A Hole at Bottom of Threaded Stud Hole in Block Triumph 6
J front cross member height from bottom to floor on BJ8 Austin Healey 5
S TR2/3/3A old seat bottom Triumph 9
P TR2/3/3A TR3A Seat Bottom Rebuild Triumph 8
A TR2/3/3A bottom gearbox cover with HDVA conversion Triumph 14
R TR2/3/3A Door bottom seal Triumph 10
M BJ8 radiator bottom hose Austin Healey 31
P TR2/3/3A Figure 8 gaskets at bottom of liners Triumph 4
M TR4/4A windscreen frame bottom rubber seal......help please. Triumph 3
S TR2/3/3A bottom out the trunnion Triumph 7
Tinkerman TR2/3/3A 1960 TR3A Bottom Rubber Seal on the Windscreen Triumph 3
K TR2/3/3A Brake Resevoir bottom Fitting that Connects to Pipe? Triumph 4
K TR2/3/3A TR3 brake fluid reservoir outlet at the bottom..... Triumph 0
J TR2/3/3A Hood lift to front apron, what size are the screws that go from bottom up? Triumph 10
S Seat bottom identification Austin Healey 1
DanLewis Correct hose from water pump to bottom of radiator? Spridgets 3
J Replacing back of the boot and two bottom corners Spridgets 3
M Sliding bottom windshield seal into groove... Spridgets 2
DNK Sore Bottom MG 7
DNK TR6 TR6 Bottom hose Triumph 5
T TR4/4A 1963 TR4 project Possum Bottom Triumph 5
tmc TR2/3/3A Top and bottom windscreen trim - TR3A Triumph 10
T Gas leaks from the bottom of my Stromberg carbs. Triumph 7
6 noise from bottom of engine... Triumph 10
Jim_Gruber Bottom Starter Motor Bolt - How do I get it loose? Spridgets 7
BugeyeNJ58 Carb leaking HS2 at bottom of float chamber Spridgets 21
G bottom rubber windshield fit Triumph 11
J TR2/3/3A Will flatbed truck scrape bottom of TR3A ? Triumph 13
T Door glass, bottom channel Spridgets 4
J Installing Heritage Seat Kit - Bottom Cushions Austin Healey 6
2wrench Help. Leak from sump cover on bottom of J-OD Triumph 31
H Any tips to install BJ8 bottom windshield seal? Austin Healey 0
RickB I just smashed the bottom of my radiator. MG 12
T MGA MGA seat frame bottom - anyone have a spare? MG 3

Similar threads

Top