Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Working on the new wiring loom today.
Two questions:
1. The brake light switch has approximately two feet of wire length. This is made up of 1 green wire with a single white stripe. And 1 green wire with a red stripe. They have bullet ends, Where do they go?
2. Coming off the loom piece with the plug end that goes to the wiper motor there are two additional wires with bullet ends; 1 solid green. And, 1 green with a black stripe. Where do they go?
My wiring diagram shows coming off the [Stop Lamp Switch] 1 green wire and 1 green wire with a purple stripe.
![mgmidget1973](http://[url="https://picasaweb.google.com/minorsands/mgmidget1973#5383347466609453634"]https://picasaweb.google.com/minorsands/mgmidget1973#5383347466609453634[/url])
Two questions:
1. The brake light switch has approximately two feet of wire length. This is made up of 1 green wire with a single white stripe. And 1 green wire with a red stripe. They have bullet ends, Where do they go?
2. Coming off the loom piece with the plug end that goes to the wiper motor there are two additional wires with bullet ends; 1 solid green. And, 1 green with a black stripe. Where do they go?
My wiring diagram shows coming off the [Stop Lamp Switch] 1 green wire and 1 green wire with a purple stripe.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.