Recently I've been losing water from the rad; pulled the valve cover off and around #1 I/E valve springs noticed the familiar white mix.
Have taken the head off and it seems to be fine. Straight edged the heck out off it and all ok.
Have used a copper head gasket & cannot detect issues with it. Maybe I missed something so will re-check it am.
Block looks good after cleaning it up a bit. Planning on draining the pan to check for water. Nothing on the dipstick.
So I'm thinking it's something in the top end.
I have the 89mm set and am wondering about going with a Cometic Head Gasket. They only come in the 88mm.
size. Would that be usable?
Thanks Everyone,
Harry
Have taken the head off and it seems to be fine. Straight edged the heck out off it and all ok.
Have used a copper head gasket & cannot detect issues with it. Maybe I missed something so will re-check it am.
Block looks good after cleaning it up a bit. Planning on draining the pan to check for water. Nothing on the dipstick.
So I'm thinking it's something in the top end.
I have the 89mm set and am wondering about going with a Cometic Head Gasket. They only come in the 88mm.
size. Would that be usable?
Thanks Everyone,
Harry