• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

threads on the fill plug for the steering box?

Share this page

P

PeterB

Senior Member
Country flag
Offline
I had a similar issue on my BJ7, although my threads were pretty bad. I went to local NAPA auto parts store and took the cover and they had a plug a little larger in diameter but same length and washer that worked great. Just be careful it is not too big as to crack the cover.
 
Similar threads
Thread starter Title Forum Replies Date
Patrick67BJ8 BJ8 Intake manifold Booster & Vacuum Hookup threads sizes. Austin Healey 2
TR3MT TR2/3/3A Whitworth Threads (as on the bolt) Triumph 6
B Damaged threads in the gas tank Austin Healey 7
nichola TR6 Water pump to manifold adaptor threads BSPT or BSP or ??? Triumph 17
S Stripped Threads Austin Healey 10
T why would an intake manifold stud have both coarse and fine threads? Spridgets 8
JimLaney Organizing threads into book? FORUM Navigation Questions 10
JimLaney Whitworth Threads or Just Nuts! Spridgets 5
Jim_Gruber 1/4 Elliptic Spring Clamps - Are those Whitworth Threads on those 1/4 Screws Spridgets 7
vette Threads for the Water Temp Sender Austin Healey 6
R BJ7 spark plug threads Austin Healey 17
Mickey Richaud General MG Two More Threads! MG 0
Basil Admn Note Using Prefixes to filter threads of interest Triumph 5
Basil Admin Note Use Prefixes to filter threads you read MG 4
luke44 TR2/3/3A TR3 Brass Heater Valve to Head - How to treat threads, if at all? Triumph 6
KVH TR4/4A Wrong Threads on New Fuel Pump? Triumph 13
K TR2/3/3A Gearbox drain plug threads stripped? Triumph 8
S TR2/3/3A Spark plug threads Triumph 10
PatGalvin TR2/3/3A Heater Spacer Threads are a mystery Triumph 4
M stripped threads on master cyl Spridgets 12
K TR2/3/3A Gearbox drain plug threads stripped? Triumph 1
Jer chasing spark plug threads on head? Spridgets 8
A TR2/3/3A TR-3A Windshiedl Tenex Peg Set Threads Triumph 2
T TR2/3/3A What size and threads for corner finisher on TR3A windshield Triumph 3
S Where are the threads from 11/7 - 11/17? Austin Healey 2
KVH What happened to all the threads between "today" and November 6? Triumph 6
TulsaFred Harmonic balancer threads Spridgets 2
J Stripped threads engine block Triumph 7
L Removing chrome from threads Spridgets 16
M Bajo bolt and rocker pedestal threads.. Austin Healey 6
DNK Threads Triumph 11
rikiwho123 uys what can be done to rstripped threads in head? Triumph 11
RickB Prestige Auto Trim zipout window- threads unravel Spridgets 1
J BN1 King Pin Nut Threads Austin Healey 1
T BE Quarter Elliptic Mounting Bolts - threads gone Spridgets 5
Don Elliott TR2/3/3A Stripped threads - TR3A block RHS rear ead stud Triumph 9
Ohiobugeye Metric or US Standard Threads? Spridgets 26
B shift lever threads Austin Healey 6
bthompson Nigel's new threads: a winter tale. Spridgets 5
davidk Stripped threads in oil pan front saddle block Triumph 12
BobbyD Stripping Aluminum Threads Triumph 17
M Block threads stripped torquing head Triumph 16
Dougal Front damper striped threads Austin Healey 30
B Manifold stud threads. MG 21
G What threads on 1500 oil sending unit? Spridgets 1
M Grease Nipple Threads Triumph 2
Morris 1500 oil filter threads Spridgets 4
Tinkerman Gear shift lever threads Triumph 21
JPSmit Gear Shift threads and trivia question Spridgets 1
6 Search old threads? Spridgets 2

Similar threads

Top