• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Harmonic balancer threads

Share this page

TulsaFred

TulsaFred

Jedi Warrior
Country flag
Offline
Need to pull thembalancer of my 1275.
I've got a bolt puller, but none of the boltsmwill thread into the puller holes on the balancer.

Doesmayone know the correct thread and bolt size?

Thanks
Fred
 
B

Billm

Yoda
Country flag
Offline
It may just be better to just unscrew the original bolt (all but about 3 threads) and let your gearpuller rest against that. Pulling it the last bit off should be pretty easy.
BillM
 
OP
TulsaFred

TulsaFred

Jedi Warrior
Country flag
Offline
Turns out the threads are 5/16-24
They were just a bit boogered up, so I had to chase the threads with a tap

Fred
 
Similar threads
Thread starter Title Forum Replies Date
roscoe 100 harmonic balancer upgrade? Austin Healey 3
Healey Nut Harmonic Balancer Austin Healey 38
P Replacing the crankshaft damper [harmonic balancer] Austin Healey 15
croz TR2/3/3A Harmonic Balancer - narrow belt pulley Triumph 12
rikiwho123 Spitfire harmonic balancer for a 1300 spitfire? Triumph 2
B harmonic balancer Austin Healey 2
Patrick67BJ8 Harmonic balancer repairs Austin Healey 8
Z 100/4 BN1 Harmonic Balancer Austin Healey 8
healeyboz pulling the harmonic balancer Spridgets 6
J Broke my harmonic balancer Triumph 15
C harmonic balancer nut Austin Healey 10
Gerard 1275 Harmonic balanceer Spridgets 7
M TR6 TR6 harmonic balancers Triumph 4
LastDeadLast Need some info - Harmonic Damper Triumph 14
M Harmonic Damper Noise? Austin Healey 9
G Harmonic vibration, revisited.... Triumph 2
G Harmonic Vibration Triumph 3
G Harmonic vibration? Triumph 2
G Harmonic vibration? Triumph 9
C Harmonic balancers/dampeners Triumph 3
G On Car Wheel Balancer Restoration & Tools 5
steveg Weber balancer on HD8s Austin Healey 11
KVH General TR Front Dog Bolt and Fan Balancer Piece Triumph 1
G GT6 Can I put a GT6 balancer [crank pulley] on a TR6? Triumph 2
c5racer Can't Mount 13" Rostyle Tires to the Balancer Spridgets 10
jjbunn Carb Balancer MG 14
Patrick67BJ8 BJ8 Intake manifold Booster & Vacuum Hookup threads sizes. Austin Healey 2
TR3MT TR2/3/3A Whitworth Threads (as on the bolt) Triumph 6
B Damaged threads in the gas tank Austin Healey 7
nichola TR6 Water pump to manifold adaptor threads BSPT or BSP or ??? Triumph 17
S Stripped Threads Austin Healey 10
T why would an intake manifold stud have both coarse and fine threads? Spridgets 8
JimLaney Organizing threads into book? FORUM Navigation Questions 10
JimLaney Whitworth Threads or Just Nuts! Spridgets 5
Jim_Gruber 1/4 Elliptic Spring Clamps - Are those Whitworth Threads on those 1/4 Screws Spridgets 7
vette Threads for the Water Temp Sender Austin Healey 6
R BJ7 spark plug threads Austin Healey 17
Mickey Richaud General MG Two More Threads! MG 0
Basil Admn Note Using Prefixes to filter threads of interest Triumph 5
Basil Admin Note Use Prefixes to filter threads you read MG 4
luke44 TR2/3/3A TR3 Brass Heater Valve to Head - How to treat threads, if at all? Triumph 6
KVH TR4/4A Wrong Threads on New Fuel Pump? Triumph 13
K TR2/3/3A Gearbox drain plug threads stripped? Triumph 8
S TR2/3/3A Spark plug threads Triumph 10
PatGalvin TR2/3/3A Heater Spacer Threads are a mystery Triumph 4
M stripped threads on master cyl Spridgets 12
K TR2/3/3A Gearbox drain plug threads stripped? Triumph 1
Jer chasing spark plug threads on head? Spridgets 8
A TR2/3/3A TR-3A Windshiedl Tenex Peg Set Threads Triumph 2
T TR2/3/3A What size and threads for corner finisher on TR3A windshield Triumph 3

Similar threads

Top