Hello.
Overhauling the steering system of my BN1 (non adjustable steering wheel), is driving me crazy, especially the trafficator.
Previous owner's mechanics did an awful job when replacing the original wheel by a MotoLita-like one, resulting in a huge mess : trafficator moving sideways in the hub and turning with the wheel, thus twisting wires and making the cancellation system inoperative, and, over the top, allowing steering box oil to seep through the olive nut because the stator tube doesn't reach the end cover... to not speak about other issues.
Here are my questions :
- having cut out the wires at the end of the steering box, I'm struggling to remove the wiring loom (I intend to replace it by a new one) from the stator tube, but it sticks inside. I tried to ease it with a heating gun, but the wires finally broke at the opposite opening
So, at the moment, the wiring loom is stuck in the stator tube with no more grip to prise it : any good idea to remove it ?
- don't you think that some part is missing (see attached picture) ?
- I guess that there should be at least some (3 ?) tiny screws to attach the trafficator to the stator tube's flange : could you please tell me what their dimensions are (size, type of thread) ?
Thank you in advance for your help.
Matt
Overhauling the steering system of my BN1 (non adjustable steering wheel), is driving me crazy, especially the trafficator.
Previous owner's mechanics did an awful job when replacing the original wheel by a MotoLita-like one, resulting in a huge mess : trafficator moving sideways in the hub and turning with the wheel, thus twisting wires and making the cancellation system inoperative, and, over the top, allowing steering box oil to seep through the olive nut because the stator tube doesn't reach the end cover... to not speak about other issues.
Here are my questions :
- having cut out the wires at the end of the steering box, I'm struggling to remove the wiring loom (I intend to replace it by a new one) from the stator tube, but it sticks inside. I tried to ease it with a heating gun, but the wires finally broke at the opposite opening
So, at the moment, the wiring loom is stuck in the stator tube with no more grip to prise it : any good idea to remove it ?
- don't you think that some part is missing (see attached picture) ?
- I guess that there should be at least some (3 ?) tiny screws to attach the trafficator to the stator tube's flange : could you please tell me what their dimensions are (size, type of thread) ?
Thank you in advance for your help.
Matt