19_again
Jedi Warrior
Offline
OK Guys, I've read through my old messages and Baz's about this and still have to post this question. My right front bearings went out as we were leaving for a ride on the first sunny day in 3 years, I've got the castellated nut off, the four nuts holding the outer hub assembly to the inner assembly (Bentley part #'s 64 and 67) but I still can't pull the hub off. Don't have the handy dandy hub puller, but reading the archives it doesn't seem necessary. I've got some bigger hammers, but I'm relying as always on the great wisdom of the forum. Wire wheels 67 B. It's red if that makes a difference :hammer: