I just installed a crane XR700 ignition in lieu of my old points setup. Now car will start but runs on a couple of cylinders only. I've tried moving the distributor to no avail. I have the window on the plastic disc lined up with the optical triggers.
I have the wires going to the right spots, red and yellow to coil, black to ground. The crane unit is blinking, so its obviously working, plus the car is starting but just not running right.
What could I have missed? Any suggestions from people who have done this conversion?
I have the wires going to the right spots, red and yellow to coil, black to ground. The crane unit is blinking, so its obviously working, plus the car is starting but just not running right.
What could I have missed? Any suggestions from people who have done this conversion?