• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Brake master is toast

Baz

Yoda
Country flag
Offline
Been monitoring the brake fluid loss....
After some ~spirited~ driving today, lost about 3/4" of fluid, well I didn't lose it, it's just on my shoes, brake pedal, rubber floor mat, garage floor, living room carpet etc...
Anyway, I'm not going to rebuild this myself, I tried with the BGT and failed miserably, so I was wondering if anyone knew a source for rebuilding these, please let me know.
While the system is bled, I'm going to change brake pads again, every set I've had squeeks! /bcforum/images/%%GRAEMLIN_URL%%/wall.gif
Cheers all....
 

Sportsdoc

Jedi Trainee
Offline
I sent mine to Sierra. I haven't gotten to the point of using the mc yet, but the work looks great and others have positive reviews.


Sierra
 

Keoke

Great Pumpkin
Country flag
Offline
Hi Baz, send the cylinder to white post restorations in White post Virginia. They are the best! Regarding the brake squeal get and install some Moss Motors anti squeal PADS not shims "PADS" and you will be good to go.---Keoke
 
OP
Baz

Baz

Yoda
Country flag
Offline
Bugeye58 said:
how are you bedding the new pads in?
Alright, I'm busted... doing autocross.
In all honesty Jeff, It's been a long time since I 'bedded' in brakes, and actually forgot.

Thanks for the sources of the repairers, I appreciate that, I'll send my B master and clutch master and slave too, get em all done.
/bcforum/images/%%GRAEMLIN_URL%%/cheers.gif
 

Morris

Yoda
Offline
Call around town and see if you can find a Cardone parts dealer. If so, you can probably have everything hydralic in your car done for less than what it will cost you to have Whitepost do your master. Not knocking Whitepost... but they serve the show car crowd more than the driving crowd.

You may want to check out rockauto.com. They sell Cardone stuff. Just check the pictures carfully before you buy. They recently sent me an MGB water pump (I think) for my 1500. When I told them they had the wrong pump listed in their catalog, they told me that I was wrong, and they actually sent me the correct pump. It took a little diplomacy to convince them of their mistake. They are not British car savy, but their parts are VERY inexpensive. And Cardone typically backs their rebuilds with a nice warranty.
 

jlaird

Great Pumpkin
Country flag
Offline
My WhitePoint MC rebuild for the Bugeye may be show quality on the inside but it is just regular stuff on the outside.

Oh yea, works and seals like a charm and comes back to you ready to install.
 
Similar threads
Thread starter Title Forum Replies Date
71TR6 TR2/3/3A Aftermarket brake and clutch master cylinders - black extension? Triumph 6
Racer-X- Frame mounted power brake pedal/booster/master cylinder kits for RHD cars? Restoration & Tools 1
prb51 100-6 Brake Master Cylinder Bore Austin Healey 5
bighealeysource Brake Master Cylinder Austin Healey 27
A Brake Master Cylinder Freeplay Austin Healey 11
volunteer Wanted: Brake Master Cyl. Repair Kit for Daimler DS420 Other British Cars 18
rgfrey Bench Bleeding Brake Master Cylinder Austin Healey 2
K TR2/3/3A Clutch and Brake Master Cylinder push rod stop bolts? Triumph 15
mctriumph master cylinder brake/clutch Tr3 Triumph Classifieds 9
mrv8q TR2/3/3A Brake master cylinder: rebuild or replace? Triumph 9
J For Sale Triumph TR 2/3 original brake/clutch master cylinder Triumph Classifieds 2
BobHaskell MGB 1980 MGB harness question - brake servo/master cylinder MG 1
D BJ8 brake master cylinder question Austin Healey 6
D TR2/3/3A Brake Master Cylinder. Triumph 4
Michael Oritt Brake Master Cylinder access Austin Healey 0
glemon General Tech Follow up on Master Cylinder and Brake Fluid Triumph 11
Jim_Gruber What is the correct tool for removing brake lines from a BE Master Cylinder Spridgets 10
R brake master missing seal Austin Healey 11
vickxxx T-Series Brake master adaptor MG 2
M TR6 Brake master cylinder question. Triumph 2
F Replacing brake master cylinder, fluid reservoir and flexible brake pipes - order? Austin Healey 4
T TR2/3/3A Girling Brake/Clutch Master Cylinder [slant port] Variations? Triumph 6
T TR2/3/3A another brake master cylinder question Triumph 16
M_Pied_Lourd TR2/3/3A Brake and Clutch Master Pushrod Question Triumph 4
T TR2/3/3A Aftermarket brake master cylinder 1961 TR 3A Triumph 11
S "59" 100-6 brake/ clutch master cylinder upgrade Austin Healey 3
H master cylinder brake vs mc clutch Austin Healey 14
PatGalvin TR2/3/3A Brake Master Cylinder Fluid Reservoir Bracket needed, TR3A Triumph 6
RJS TR4/4A Brake Master Cylinder Cap Options Triumph 11
D MGA Master Brake Cylinder Leak MG 2
nevets question about brake master cylinder Austin Healey 12
Lukens More clutch / brake master cylinder questions. Triumph 7
L Initial Adjustment of Pushrod on BJ8 Brake Master Cylinder Austin Healey 5
mgedit TR2/3/3A Brake Line Master to Banjo Connection LHD 56 TR3 Triumph 4
Jim_Gruber Brake Master from Alternative Sources Spridgets 10
KVH Bleeding the Brake Master Cylinder Triumph 8
J TR6 TR-6 Brake Master Cylinder Seepage Triumph 4
J TR6 TR-6 Brake Master Cylinder-Rebuild or Replace ? Triumph 4
D Brake master cylinder Austin Healey 1
K TR2/3/3A TR3 Brake & Master Cyl "C" clips? Triumph 2
A Wedge 1980 TR7 Brake master Question Triumph 5
R TR2/3/3A TR 3a brake/clutch master cylinders/pedal movement Triumph 4
rlich8 TR4/4A TR4A Brake Master Connector Leak Triumph 2
A Divided brake master cylinder MG 6
1 Brake Master Cylinder Spridgets 11
K TR4/4A TR4A Master Brake Cyl Internal Spring Clip? Triumph 6
K TR4/4A TR4A Brake Master Cylinder Internal Spring and Triumph 13
E BE w/dual line brake master....90 degree fitting? Spridgets 12
E 1275 Brake Master Nylon Bushing Spridgets 3
letemglow Brake line layout with dual master cylinder MG 6

Similar threads

Top