Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
The upholstry in my TR3 is pretty decent but old. The driver's seat seams now are splitting in the "pleats" (not edges). The material itself is not torn or split but the thread has given up its job of holding the "pleats" together. Is this repairable? I've still got some things I'd rather do to make the car better before upholstry. EG has anyone taken the original type material off to have resewn?
-
The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
-
Hey there Guest!
If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.**Upgrade Now**
(PS: Subscribers don't see this UGLY banner)
Upholstry repair [seat]
- Thread starter jayhawk
- Start date
Share this page
D
DougF
Guest
Guest
Offline
If the leather is still soft and supple, it shoud be repairable. If it has dryed out and hardened, it should be replaced.
I ran into that problem with my occasional seat. The leather looked perfect, but was very hard. The upholsterer told me that it would only tear if repaired.
I ran into that problem with my occasional seat. The leather looked perfect, but was very hard. The upholsterer told me that it would only tear if repaired.
Offline
It's certainly worth a try, even if the leather does seem dry and/or hard. There are any number of conditioning products out there that will help greatly. It won't look new, but it doesn't cost that much to experiment!
Geo Hahn
Yoda
Offline
I've had seams restitched with good results.
I haven';t tried but plan to use some products from this place, as I recall, they also have stuff to soften stiff leather:
https://www.leatherique.com/index.htm
I haven';t tried but plan to use some products from this place, as I recall, they also have stuff to soften stiff leather:
https://www.leatherique.com/index.htm
Great. again thanks for the input. I would imagine they have been fairly dry-- the car essentially sat in a garage for most of 20 years but I did put some dressings on the interior recommended by a shop when I first got it and cleaned it up. Will give it a try. I've got to switch the seats anyway, the PO had the seats in the opposite positions. The passenger seat is on the driver's side. Anyway I'm assuming that because the current driver seat folds forward and both seats sort of face outward toward the doors a little.
Harry_Ward
Jedi Knight
Offline
yes your seats are on the wrong side of the car. Folding forward seat is located on the passenger side.
Similar threads
Similar threads
-
-
-
-
AInk on Leather Upholstry & How to get it OFF!!!
- Started by Americanshine
- Replies: 8
-
TR2/3/3A Update on the head gasket repair......something is not right/
- Started by karls59tr
- Replies: 5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wanted: Brake Master Cyl. Repair Kit for Daimler DS420- Started by volunteer
- Replies: 18
-
-
-
-
-
-
-
-
For Sale - Haynes Trimumph TR7 (1975-1981) Automotive Repair Manual- Started by humanoid
- Replies: 0
-
TR2/3/3A Speedy Sleeve Repair Sleeves for Rear Axle Pinion and Half Shafts
- Started by mastaphixa
- Replies: 1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TR2/3/3A Seeking advice on how to repair TR3 steering wheel broken spoke.
- Started by TuffTR250
- Replies: 8
-
-
-
-
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.