Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Has anyone tried one of these Wilwood MCs:
https://www.summitracing.com/parts/wil-260-6579/overview
https://www.summitracing.com/parts/wil-260-1304/overview/
They look to be a bolt-in replacement for the clutch (0.75 bore), or if you accept a smaller fluid reservoir, for the brake MC. Outlet thread is the same as Girling (3/8 x 24), bolt pattern is the same, and I can't imagine it would be impossible to switch the pushrods.
If I'm wrong about this, I'd be grateful to learn.
https://www.summitracing.com/parts/wil-260-6579/overview
https://www.summitracing.com/parts/wil-260-1304/overview/
They look to be a bolt-in replacement for the clutch (0.75 bore), or if you accept a smaller fluid reservoir, for the brake MC. Outlet thread is the same as Girling (3/8 x 24), bolt pattern is the same, and I can't imagine it would be impossible to switch the pushrods.
If I'm wrong about this, I'd be grateful to learn.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.