• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Push the Dot post on dash of BN6/BN7

bighealeysource

Luke Skywalker
Bronze
Country flag
Offline
Hey all,
Just finishing installing applicable fittings to install
a tonneau cover for my 58 BN6. I know there is a
"push the dot" post on the dash covers of BN4,BT7's, but
not sure if one was installed on a BN6/BN7. This would be
the post installed right by the rear view mirror. Have seen
it in pictures on BN4/BT7's but not on BN6/BN7's. Anyone
either with a BN6/BN7 or knowledge if there was, please
weigh in on this question.
Many thanks,
Mike
 

Johnny

Darth Vader
Country flag
Offline
Hello Mike, here's a photo of my BN7 mirror location. In order to have a tonneau cover you need these fasteners. If I recall the one on the passenger side is a little more to the right of the mirror. They are hard to see in the photo, sorry.
 

Attachments

  • 21608.jpg
    21608.jpg
    34.4 KB · Views: 135
Similar threads
Thread starter Title Forum Replies Date
B MGB while driving engine cuts out if I let off or push more throttle it comes right back on MG 5
K TR2/3/3A Clutch and Brake Master Cylinder push rod stop bolts? Triumph 15
C MGA Change a pull starter to a push button system MG 6
PAUL161 T-Series Bent Push Rods MG 34
R J-H no longer needs a push! Other British Cars 6
K Restoring Horn Push Button Austin Healey 12
Joe Reed General MG Early Midget horn push on Personal wood rim steering wheel... MG 3
Patrick67BJ8 Brake Pedal Vary Hard to Push Down and Brakes feel like there's no Booster on my BJ8 Austin Healey 27
Got_All_4 TR2/3/3A Push switch for washer fluid pump Triumph 4
Lukens TR2/3/3A Anyone ever see a push/pull throttle mounted on the dash? Triumph 4
T timmers 67, push rods and lifters Austin Healey 4
Martinld123 Push button on top of new H6 carbs float bowl from Moss Austin Healey 3
Joe Reed MGB Clutch Slave push rod...past its prime MG 2
KVH TR4/4A Rocker Shaft Lubrication, and Issue with Push Rods Triumph 1
GTP1960 TR2/3/3A Clutch slave cylinder / push rod alignment Triumph 10
F BT7 3000 - Push rod problem on clutch slave cylinder Austin Healey 7
S TR2/3/3A copper gasket sealer and push rods Triumph 10
J Healey 100 -- Broken rocker and bent push rods !!! Austin Healey 7
Perrymip TR2/3/3A Starter Solenoid Push Button Triumph 11
tahoe healey Clutch master cyl. push rod Austin Healey 2
P Grounding of Horn Push-Bugeye Spridgets 4
Kleykamp TR2/3/3A hollow push rods ? Triumph 6
DornTRoriginal TR2/3/3A My Push Rod Situation Triumph 12
SMGoose Push rod return spring Triumph 7
M stainless push button snaps for convt boot Austin Healey 2
F Replacing the horn push adjustable steering wheel Austin Healey 7
T TR2/3/3A TR3b Master cylinder push rod clevis Triumph 2
C Wiring new Mota Lita horn push into my MG Midget Spridgets 6
Donalvin removal of push-pull dash control buttons Triumph 5
S TR4/4A Leaking push rod tubes, TR4a Triumph 7
BugeyeNJ58 Push or Pull - Electric Fan Spridgets 3
T Bugeye clutch MC push rod length Spridgets 6
G Push'in Springtime Spridgets 3
Mickey Richaud Brake M/C Push Rod Spridgets 8
Mickey Richaud Brake M/C Push Rod MG 2
6 elect. fan..push or pull Triumph 16
S TR2/3/3A tr3 unsoldered push in connectors Triumph 3
justin_mercier Source for a push/pull DPDT switch? Triumph 13
K M/C push rod adjustments Spridgets 4
R clutch push rod replacement question Spridgets 6
longbridgehealey horn push Spridgets 3
T TR4/4A ? on TR4A clutch shaft - wear @ push-rod attachment Triumph 6
wangdango TR6 '76 tr6 horn push Triumph 1
mikecyc72usa The final push Triumph 0
I push rod question Triumph 8
drooartz Clutch push rod Spridgets 13
A TR4/4A TR-4 cylinder head push rod tubes Triumph 2
livinginthepast Stupid Q dejour - horn push/badge won't stay put! Spridgets 14
ncbugeye Completed push fuel pump installation Spridgets 3
ncbugeye Push SU fuel pump in Bugeye Spridgets 8

Similar threads

Top