Aluminum sill trim BJ8

[Cutlass]

Getting down to the last touches, folks. There is an aluminum trim piece that attaches to the top of each door sill, over the carpet, on the inside of the sill. My question is where and how many screws are used to attach the trim piece? Thanks. Pictures soon.

 

[AUSMHLY]

The screws are installed on the inside, not on the top of the trim piece.
I put one on each end and two in the middle, equal spaced. (Others may chime if more or less is correct.)

Here's a couple photos of the screws that came with the trim pieces:

 

[tahoe healey]

I believe the screws are small pozi (spelling ?) on all the aluminum trim. Available from Moss and others.

 

[John_Progess]

My car is as Ausmhly states, the end screws are about 1" in and all the screws are only about 1/4" from the bottom edge of the trim piece. Have a good day!

John