• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

carb question

kaidoSprite

Freshman Member
Offline
I'm pretty sure somthing is wrong with the front carb on my 68 sprite. It won't behave like it should. I've syncronized the butterfly's and am Idleing where I should be idleing. The problem is that the front carb won't hold the right air fuel mixture. No matter how rich I set it to it still acts like its running lean. The rear carb acts fine, when I slighty lift the piston at idle it revs up alittle then dies back down. While I hear almost no difference when I lift the front piston. Which leads me to believe something is wrong with my front carb's ablity to deliever fuel. Anyone have any idea what could be causeing this. /ubbthreads/images/graemlins/confused.gif I have recently replaced my jets and float needles.

Thanks
 
Country flag
Offline
Sounds like a vacuum leak. Have you sprayed some carb cleaner aroung the manifold and the throttle shafts? (and listened for change in idle speed)
 
G

Guest

Guest
Guest
Offline
I agree with Trevor - it sounds like you've got vacuum or air leaks. I have found these little engines with shared intake manifolds will run - at idle - on one carb, but just try to accelerate! Get the engine running at fast idle and carefully spray some carb cleaner at the throttle shafts and carb bodies where they meet the intake manifold. Any noticeable change in engine speed indicates an air leak that needs "fixin".

Tim C.
 
OP
kaidoSprite

kaidoSprite

Freshman Member
Offline
I couldn't notice any difference when checking for leaks so I just took the carb off to better inspect it. Turns out The new jet I just put on was blocked up and leaking alittle, not at the fuel resivior but right at the bottom of the carb. The small plastic hose inside was kinda crimped so I think it was restricting fuel flow. Instead of waiting for another jet I fastened a small hose clamp around it which seems to have stoped the leak temporaily. It holds the right mixture now and wow what a difference.
 

aeronca65t

Great Pumpkin
Offline
kaidoSprite:

Glad you were able to sort out the problem...I was about to suggest the same thing as the other guys.
Is that your red Sprite in the picture? If so, is it a racer?
 
OP
kaidoSprite

kaidoSprite

Freshman Member
Offline
nope thats not my sprite. I would love to race mine but finacially I don't think I could support it yet. I'm in colleage right now so money is tight. Heres a pic about a week after we got it to about "road worthy" condition.
66866-003_0A.jpg
 

Attachments

  • 66866-003_0A.jpg
    66866-003_0A.jpg
    88.5 KB · Views: 123
Similar threads
Thread starter Title Forum Replies Date
M New Member with an HD8 Carb Question Austin Healey 1
K TR2/3/3A TR-3B carb question Triumph 13
D TR2/3/3A Another Carb question. Triumph 22
D Tri carb: order of installation question. Austin Healey 5
tahoe healey Dumb carb question Austin Healey 23
Michael Oritt SU H6 carb question Austin Healey 5
R T-Series SU carb needle question MG 1
D 62 tri-carb tuning question Austin Healey 8
S TR2/3/3A Carb Idle Question Triumph 6
H General Tech SU HS4 Carb Question Triumph 5
bugedd Carb/intake question Spridgets 6
CessnaTPA Carb Spring Question Austin Healey 7
M_Pied_Lourd TR2/3/3A Weber Carb Installation Question Triumph 13
H TR2/3/3A SU Carb Float Question Triumph 18
davidb BT7 triple carb question Austin Healey 15
HealeyDave HD Carb Jet Adjusting Screw Question Austin Healey 2
sim 1970 H2 carb question Spridgets 2
bigbadbluetr6 TR6 TR6 carb question and running rough Triumph 13
Lukens TR2/3/3A TR3 SU carb question Triumph 10
W TR6 carb question tr6 Triumph 1
JPSmit Stromberg Carb Question Triumph 15
S Question on rebuilding Stromberg carb Triumph 24
glemon SU Carb question float level/leaner/richer Austin Healey 2
bighealeysource 100M carb question Austin Healey 2
B TR6 TR-6 carb question Triumph 9
SkinnedKnuckles Question about AH 3000 carb damper oil Austin Healey 21
G TR6 TR 6 Carb question Triumph 5
G HS4 carb question Spridgets 10
D Spitfire Spitfire carb question Triumph 8
SkinnedKnuckles Question for Our Carb Gurus Triumph 0
drooartz Carb mixture question Spridgets 9
Monark192 Carb Interchangeability Question MG 9
Jim_Gruber Quick Carb Question Spridgets 16
JodyFKerr Spifire 1500 Carb teardown question Triumph 10
livinginthepast Quick question on setting fast idle/balancing carb Spridgets 21
T Stromberg 150 CD carb question Triumph 4
F GT6 GT6 MK3 Carb to Manifold Gasket Question... Triumph 2
T TR2/3/3A TR3 carb question Triumph 3
T SU carb question Triumph 3
JPSmit Carb Adjustment question Spridgets 30
JPSmit gasket question - carb Spridgets 9
JPSmit SU carb question Spridgets 7
JPSmit Carb Conversion Question - new post Spridgets 7
T Carb Gasket Question Triumph 2
M 79 midget carb question Spridgets 11
Number_6 SU Carb Question Triumph 14
JPSmit Quick Carb Question Spridgets 2
JPSmit Just wondering - carb question Spridgets 10
T Newbie SU Carb Rebuild & Restoration Question Triumph 31
tony barnhill MkI Midget Carb Linkage Question Spridgets 27

Similar threads

Top