TR6 Wire harness for tr6

[moneypit6]

I'm new to this forum,,,,,purchased a tr6 a couple months ago,,,,
who makes the best wire harness? My tr6 is a 1975.
the engine is coming out to be rebuilt,,,,so I thought that would be a good time to replace the wire harness .
Thanking you all in advance.,,,

 

[Gliderman8]

First, welcome to the BCF. Is the original wiring in bad shape? Any burnt or frayed wires? If the original is useable I would stick with it.

 

[M_Pied_Lourd]

Hi MP,

Are you planning on adding any electrics like bigger alt, electric fan, driving light, upgraded headlights, etc?

Welcome to BCF. What part of TO?

Cheers
Tush

 

[moneypit6]

Thank you,,,,
the old harness has damaged wires,,,,burnt,,,,it a
so has been tampered with,,,grounds added,,,,some interior lights will not shut off,,,,some have no power,,,,
i don't plan on adding extras to the car,,,other than a good radio,,,

 

[Gliderman8]

Try Advance Auto Wire https://www.advanceautowire.com

 

[mrv8q]

One of many alternatives: NFI

https://trf.zeni.net/wc/specials6.15/6.php

 

[TR3driver]

Depends on your goals, IMO. The AAW wiring system referenced above is substantially higher quality than stock, but also obviously non-original. Good for a "driver", not so good for a show car.

If you want "as original", then TRF (the other link above) is good, or British Wiring is another good choice
https://www.britishwiring.com/category-s/152.htm

BTW, welcome to the asylum!

 

[moneypit6]

Thanks for the advice,,,,I will check out the info,,,,my car will be just a weekend driver,,