KVH
Darth Vader
Offline
I think I may have asked this once before, but the "specs" on my custom cam (the PO's) say that valve lash in .016 in the intake and .018 on the exhaust. The intake opens at 20 and closes at 60, and the exhaust is just the reverse. Valve lift is 271 with exhaust at 110 degrees BTDC, and intake at 110 ATDC. The exhaust closes at 3 degrees BTDC, and the intake opens at 3 degrees ATDC.
Should any of this cause me to tune my car differently from the directives of the shop manual?
Should any of this cause me to tune my car differently from the directives of the shop manual?