• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Bent Rear Hub/Axle

glemon

Yoda
Country flag
Offline
I noticed my TR250 has a bent hub on the rear, I made sure nothing was interfering with snugging the wheel or drum down, and even swapped drums and wheels to isolate and it looks like the hub is slightly bent, is there any fix short of new parts?

Big Hammer?

What likely caused it, hard curb hit?, the hub is tight on the bearing no discernable play.
 

Andrew Mace

Moderator
Staff member
Country flag
Offline
"Big Hammer" is probably what caused it, one way or the other. It could have been the result of an impact, but it also could have been the result of someone using the wrong type of puller at some point in the past? I think replacement is the only option regardless.
 

TR6oldtimer

Darth Vader
Offline
The flange can be repaired, but only after disassembling the hub and spending a lot more money then a replacement or an up grade will cost.
 
Similar threads
Thread starter Title Forum Replies Date
B Bent frame rails near BE front end Spridgets 2
P Classic Tube Pre-Bent Brake Lines Austin Healey 5
PAUL161 T-Series Bent Push Rods MG 34
L TR2/3/3A Bent lower wishbone arms Triumph 6
C TR4/4A Bent pushrod Triumph 20
KVH TR4/4A Bent Valves Triumph 11
M TR2/3/3A Forward Carb Jet Lever Bent Triumph 12
B Overdrive Operating valve bent Austin Healey 15
J Healey 100 -- Broken rocker and bent push rods !!! Austin Healey 7
N Spitfire Should this be bent? Triumph 4
nevets pre-bent brake lines Austin Healey 7
M Bent Frame Spridgets 3
B TR2/3/3A is this a bent tr3b frame? Triumph 7
tinman58 Bent pushrods Triumph 69
J Disc rims all bent and out of round Triumph 11
bugedd My bugeye is bent Spridgets 31
jsfbond Flange bent? Triumph 6
theleisure 3 out of 4 wheels bent, looking for new used set Spridgets 11
H TR2/3/3A TR3 Accelerator Shaft -- Straight or Bent? Triumph 9
I TR6 TR6 windshield frame bent? Triumph 8
19_again coil springs are bent Triumph 10
R How do you tell if a rim is bent or warped Spridgets 1
J Bent camshaft for 64 BJ8? Austin Healey 1
K Bent trunnion fulcrum Triumph 21
G Bent a Lifting Eye.....Whew! Triumph 8
69MGC Any tips for fixing a bent boot lid MG 7
drooartz Bent pedestal stud Spridgets 13
pan Bent push rod Austin Healey 3
sultanoswing Bent Rims - fixable? MG 10
timbn2 Bent BN2 Steering Column Austin Healey 8
Webb Sledge Bent Valves/Head Gasket? Triumph 13
gsalt57tr3 TR2/3/3A TR3 Bent Frame Triumph 13
Webb Sledge TR6 TR6 Throttle Linkage Bent? Triumph 5
AUSMHLY bent frame Austin Healey 15
Guinn Bent bonnet MG 5
S TR4/4A Bent TR4 Frame Triumph 5
petnatcar Rear View Mirror Relocation Austin Healey 0
Carlbanan56 MGB Rear axel torque? MG 4
petnatcar Rear View Mirror Relocation Austin Healey 0
trbby2 TR4/4A TR4A Intermittent rear wheel locking? Triumph 19
Carlbanan56 MGB Rear wheelbearing clicking MG 8
Carlbanan56 MGB MGB rear break rebuild MG 6
B BJ8 Rear Backrest Hinges Austin Healey 4
F For Sale E Type Series II front and rear bumpers good condition Jaguar Classifieds 0
bigjones TR2/3/3A Rear tail light not budging Triumph 5
5 Wanted Wanted 1966 mgb banjo type axle rear hub MG Classifieds 0
scottkilpatrick TR4/4A TR4 Rear Brake Drum Removal - Basic Question Triumph 16
J TR2/3/3A TR2 Fitting/mounting rear wing Triumph 11
Michael Oritt Rear Crank Seal Kit Austin Healey 7
BT7 Owner Rear Crankshaft Bearing Cap Austin Healey 4

Similar threads

Top