• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Don't try this in your Spridget!!

drooartz

Moderator
Staff member
Gold
Country flag
Offline
My speedometer doesn't work, so I'm in the clear, right?
grin.gif
 

198686d

Jedi Trainee
Offline
No danger of me getting caught doing 140 mph in the bugEye. I'm a conservative driver.

dave in University City, MO

61 AHBE
04 Mini Cooper S
05 Vespa ET4
09 Triumph bonneville
 

jlaird

Great Pumpkin
Country flag
Offline
Sixty or so gets my attention when I stop to think of all the stuff I bolted in going round and round.
 
V

vagt6

Guest
Guest
Offline
My Midget seldom, if ever, sees more than the posted speed limit. Like Jack says, she's got too many moving parts installed by yours truly, an admittedly highly amateur mechanic.

My GT6s were a different story, they seemed to like to go fast and were set up for it. Not the Midget. She's all stock, for a nice, smooth ride. :yesnod:
 

JPSmit

Moderator
Staff member
Silver
Country flag
Online
Pretty sure I'm never going to get caught doing 140 in Ms Triss unless there is a cliff involved. Have had her to 80, once, leaves terrible puckers in the driver's seat.
 

RickB

Yoda
Offline
With the 5 speed in I've found myself cruising at 4000 rpm a couple times now in 5th gear.
4K is 70 MPH in 4th gear.

I know that 4K in 5th is way too fast, I think I've grown used to the sound the engine makes at 4k - I'm going to have to retrain myself before the Troopers notice.

Don't have the speedo hooked up yet, I think that's going to help a lot.
 

RickB

Yoda
Offline
BillM says my car has a space under there where it's not as bad to get to as with the earlier cars. Your's being a 1500 shell also should have this access space.

Mine is connected to the transmission but without the 90 degree adapter.
The one I ordered had a square pin and the trans needs a keyed pin, Bill has a box of converter pins that slide on the square part so it become the pin or keyed adapter.
Also the bit that screws onto the back of the speedo is wrong and needs to be changed. Once we get a little decent weather I'll roll over to Bill's and we will get it all hooked up.
 

Nelson

Jedi Warrior
Country flag
Offline
If you have a GPS you could use it to get a speed reading at various tach readings.
 

RickB

Yoda
Offline
I have an app on my Android phone called "SpeedView" and it's very helpful in that way.
 

RickB

Yoda
Offline
Not if it has a place to fit some batteries.

So - trouble with the purple wire?
I ask because I have the same.
No lighter and no courtesy light.
It seems when I get it working my circuit for brake lights, wipers and turn signals gets flaky.
I suppose it's just a coincidence but it really seems like that's the way it works in my car.

I need to sort out my wiring mess, I need a couple good rain free days for that.
 
Similar threads
Thread starter Title Forum Replies Date
Gundy Don't try this at home! Spridgets 112
M Don't Try This At Home? Spridgets 4
bighly Cause of rear wheel lockup at 55MPH [don't try this at home kids] Austin Healey 13
T MGB Quick question about something that don't really matter just want to know. MG 9
kodpkd Valve Cover Gasket - Don't do this! Austin Healey 14
R TR4/4A Carburettor is French for DON'T TOUCH! Triumph 2
jlaird MGB Don't post like I did 10 years ago. MG 7
BierRunner TR6 Turn Signals/Hazards don't work Triumph 16
PC somethin' I don't see evrey day Spotted 1
tr6nitjulius General TR DYI don't park on bare concrete fix Triumph 1
CJD General TR Parts Just Don't Last Anymore Triumph 6
P Seat Bottoms And Bases Don't Seem To fit Together Well Austin Healey 4
JPSmit So I guess I don't need to lay off the churros after all Spridgets 4
Gliderman8 Lights don't break FORUM Navigation Questions 23
S TR2/3/3A Don't throw anything away. Triumph 7
TR3TR6 TR6 Turn signal lights don't flash when under load. Triumph 5
TomMull Elan Plus 2 post 1968 numbers don't quite match Lotus 0
JPSmit I don't always dream of owning an RV Other Cars 0
TulsaFred New Bugeye Seat Covers from AH Spares don't seem to fit properly Spridgets 10
Geo Hahn General TR R.I.P. Don Elliott Triumph 13
Got_All_4 TR2/3/3A Beauty Rings Don't Fit Triumph 22
D TR6 Rear lights don't work. Grounding Problem ? Triumph 14
1 MGB I don't know how or why, but I think I will need a new clutch :[ MG 4
Csarneson Old Engine - Journals don't fit? Austin Healey 2
N Things you see when you don't expect it. Spotted 1
HealeyRick You Don't Need a Weatherman ... Austin Healey 9
Popeye TR4/4A TR4A front frame reinforcement / parts don't fit Triumph 6
vette Vapor Lock, Out of Gas, Hmm, Ahh, Don't know? Austin Healey 32
Mickey Richaud MGB Don Hayter Gets His Watch MG 1
PC don't know, but I have a pretty good idea, Spotted 0
Lukens Don't hate me... Austin Healey 22
M I don't love her anymore Spridgets 5
D Don't buy top plate shims for bishop cam steering from Moss Restoration & Tools 5
bugedd Don't know what to do Spridgets 17
Got_All_4 Wedge Hazard siginals don't work!! Triumph 4
C Order of Assembly? Do and don'ts? Austin Healey 9
R TR4/4A Assembling the interior - dash support and radio plate screw holes don't match up Triumph 4
Bob_Spidell Why I don't drive my Healey to Mexico [any more] Austin Healey 4
longbridgehealey Another I just don't understand electricity question Spridgets 6
D Don't ignore stiff window regulator Austin Healey 8
A Big Healey Restoration Do's & Don'ts Austin Healey 11
B settings don't stick FORUM Navigation Questions 0
D Information about Don Wylie Racing 0
X don't fix it if it ain't broke Spridgets 1
J Weld thru Primer, I don't like it! Restoration & Tools 2
J why they say don't buy replacement fenders! Triumph 4
cmacmillan straw poll - snaps don't line up Triumph 2
B Don't laugh..!! MG 8
Cottontop Don't we WISH it was this easy Restoration & Tools 5
B Second picture. I don't quite get this yet Triumph 1

Similar threads

Top