Found some at an Advance Auto, Dorman Help! brand, part #12701 (carried by others, like AutoZone I think) These fit my slave and should fit the front calipers. 2 for $10. I popped one in the slave, clear hose to bottle, pumped the pedal, watched a few air bubbles fly through, then nothing. Pedal felt good so on went the wheels and I went for a ride. Not bad for Dec. 30 in Michigan! 28 degrees, didn't bother to put the top up, coat hat and I was off. Forgot gloves though so my steering hand turned red. Very cool to get her legs stretched, I had rust on my rotors, that's just not acceptable.
PS instead of a 7/16" wrench to turn, it's a 3/8". So I put one in my vise and bent it so I can turn through the access hole.