wiring harness on passenger side

[msoylemez]

Hi,
Installing the new harness on my bugeye...just wanted to confirm it travelled back to the rear of the car via the passenger side of the car.

Thanks.

 

[GB1]

Yes I believe it does.

 

[drooartz]

Just finished rewiring mine. The harness travels down th passenger (RH) side, underneath the interior panels. Back of the door opening it goes into the body and over the rear wheel to the rear. I probably have a few photos from pulling my harness I can post when I get home if it would be helpful.

 

[DrEntropy]

Go Drew! Already "payin' it forward!"

YAY!

 

[msoylemez]

Drew, that would be great. thanks.

I wonder if there is a way to get the harness *into* the body (rocker panel?) before the "back of the door opening" as you mention. This would allow for a more finished look, don't you think? Perhaps it would be a bad idea from the standpoint that water tends to get into the rocker panels, however...

Mustafa

 

[drooartz]

There didn't seem to be a way to put the wire into the rocker any closer to the front, without drilling holes and such. With the panels in place, you really can't tell it's there. Here's a couple shots from when I took out the old wires:

Hope these help.