Digging through my parts and have come up with a cam that is marked KC 276 FD. Its obviously a 276 degree performance camshaft. The stamping is on the drive end in an arc. The cam is a star drive. Can anyone identify the company from this data???
I had thought the cam had a lobe that was going flat but now as I think about it there was lifter that was cupping when I tore this engine down. The parkerizing is off most of the lobes but they are hard an shiny and don't appear to have anything wrong with them so I'm thinking of reusing it with a new set of good lifter's. Any advise????
Kurt.
I had thought the cam had a lobe that was going flat but now as I think about it there was lifter that was cupping when I tore this engine down. The parkerizing is off most of the lobes but they are hard an shiny and don't appear to have anything wrong with them so I'm thinking of reusing it with a new set of good lifter's. Any advise????
Kurt.