• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

1275 exhaust on MKI Midget [1098]

Brian_C

Member
Offline
I snagged the 1275 manifold. I was about to order the 1275 pipe, but saw it doesn't include the flange on the head pipe.

How would one go about getting a flange? Can I snag one at my local exhaust shop or does it need to be specifically for that sized pipe?

Also, besides the gaskets, is there anything else I need to watch out for? Can I reuse my 1098 muffler or do I need to get a new one?


Thanks for putting up with the dumb questions.

Brian
 

Jayrz

Jedi Trainee
Offline
Brian,

Yes if you use the 1275 manifold the new exhaust pipe has a different downpipe. Just happen to have a shiny new one here in the garage.

I sent a PM, am in brighton CO and have that stuff and a spare 1098!.

Jay
 

PeterC

Jedi Warrior
Offline
Brian, if all you need is the flange, it is the same as on an MGB front pipe. MGBs though have them supplied on the pipe (actually 2 per pipe) as they can't be removed. Any MGB owner that has an old pipe laying around will have a few of them as will many Brit salvage yards.

Peter C
 

GB1

Yoda
Country flag
Offline
Brian

If you can't get a flange, pm me, I think I have an extra.

Pat
 
Similar threads
Thread starter Title Forum Replies Date
M 1275 Exhaust Manifold Needed Spridgets 6
TulsaFred 1275 exhaust manifold ? Spridgets 1
M 1275 Exhaust Manifold Needed - Along with Advice Spridgets 5
healeyboz 1275 Header and exhaust Spridgets 25
S exhaust 1275 MG 3
CARSINC WANTED: 1275 Engine Spridgets 0
M 1275 Timing Cover Vent Spridgets 2
drooartz 1275 cruising RPM Spridgets 5
D A distributer question on the 1275 engine. Spridgets 7
K Usual 1275 rear main oil leak question Spridgets 0
abarth69 Innocenti 1275 upgrade path Spridgets 1
D MG Midget 1275 rear oil seal. Spridgets 0
AngliaGT 1275 Engine Value? Spridgets 5
M 1275 Race Clutch Racing 5
drooartz Visual ID of a 1275 Spridgets 14
jehuie SOLVED: Fixing electrics on Morris Minor with 1275 swapped in Spridgets 13
M Need help removing the pinion assembly from a late 1275 steering rack Spridgets 7
jehuie Tuning up a 1275 Spridgets 17
B General MG 1275 Midget CamShaft Slot / Star drive to Oil Pump MG 2
BobHaskell Mini Cooper 1275 engine rebuild British Motor Corp 9
S 1275 oil pan removal Spridgets 30
M 1275 too high? Spridgets 2
R For Sale Fidanza Aluminum Flywheel for 1275 A-Series Spridgets Classified 0
Lin Checking static timing for a 1275 with Crane XR700 ignition Spridgets 0
Lin Fan belt for 1275 with alternator Spridgets 4
B Installing cam bearings 1275, can I do it? Spridgets 1
K 1275 Distributors Spridgets 6
T Dampner for a 1275 [damper? dampener?]: recommendations Spridgets 6
T Rebuilding a 1275 for a BE Spridgets 8
R 948 convert to 1275 info Spridgets 13
G Wanted ISO Gearbox for 69 Sprite, 1275 engine Spridgets Classified 2
Rut Bugeye 1275 temp probe placement. Spridgets 8
jtaylor3 1275 EN40 Crank Spridgets 5
S 1275 Blueprints Spridgets 7
A Bugeye engine swap, 948 to 1275 Austin Healey 11
M Judson Supercharger On A 1275 Spridgets 6
6 Oil pressure, or lack there of on fresh 1275 Spridgets 13
H Is there any difference in using the 1275 Float Bowl that have a different casting? Spridgets 6
Jim_Gruber 1275 Crankcase capacity is? Spridgets 4
N 1275 cams? Spridgets 2
T matching 1275 to bugeye rad ?? Spridgets 12
T Wanted wanted-- 1275 ribcase shifter and shifter seat cover if possible Spridgets Classified 0
6 1275 Head to block dowel pins Spridgets 10
DugMoney Need Advice - Moving Temp Gauge Sensor 1275 Spridgets 3
M Proper running temp for 1275 Spridgets 28
M Wanted 1960 Bug eye sprite 1275 ! Austin Healey Classifieds 0
M Wanted 5 speed tranny for my 1275 bug eye Spridgets Classified 0
doc50 Wanted H2 SU carbs / manifold for 1275 1973 MG MIdget Spridgets Classified 3
Jim_Gruber 1275 Damper Pulley Needed Spridgets 16
T How to add a bit more realiability/endurance to a stock 1275 engine rebuild? Spridgets 9

Similar threads

Top