• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR2/3/3A Door capping—batting needed?

Jim_Stevens

Jedi Warrior
Gold
Country flag
Offline
Hi all,
I'm reupholstering the door capping now, and am not happy with the look. When I glued on the new leather, I can see the outline of the rubber padding. So I’m wondering if I should add a strip of thin batting or wool flannel to prevent this. The attached mfr picture is not mine, but definitely shows the issue. I don’t recall seeing that on the original, although it did have 50 years worth of elbows to settle in!
Jim
 

Attachments

  • F8FA2AC0-BD15-433E-8ADB-CE7493730971.jpg
    F8FA2AC0-BD15-433E-8ADB-CE7493730971.jpg
    60.2 KB · Views: 82

TomMull

Darth Vader
Silver
Country flag
Offline
My original door caps had a thin layer of batting under the leather.
Tom
 

CJD

Yoda
Country flag
Offline
The original was cotton batting, and can be found at most sewing stores. I use JoAnns, but I’m sure hobby lobby would have it too. The batting is layed over the rubber and up to the metal frame, but not overlapping the frame. It prevents the little indent you are worried about in 2 ways. First, it adds filler in that area, which is obvious. Not so obvious, by gluing the batting to the rubber, but NOT gluing the leather to the batting, it allows the leather to “float” flat and straight over the gap. Without the batting, the glue pulls the leather into the gap, adding to the depth of the dent.
 
OP
Jim_Stevens

Jim_Stevens

Jedi Warrior
Gold
Country flag
Offline
Thanks all. That did the trick. Funny how the right answer is the obvious one!
 
OP
Jim_Stevens

Jim_Stevens

Jedi Warrior
Gold
Country flag
Offline
How are you finishing the ends where the chrome caps go? Just bunching it up as best you can.

David
I’m cutting the felt to the end of the end cups, and leaving the leather 1/4” longer than the cups, then folding the leather into the cups, and pressing the caps on. Am I missing something ?
 

DavidApp

Yoda
Gold
Country flag
Offline
Thank you.

Had not got that far so I thought I would ask for some suggestions before I was at the where do we cut this bit stage.
Like painting Upholstery is a new skill I am learning on the job.

David
 
Similar threads
Thread starter Title Forum Replies Date
S TR2/3/3A Aluminum door capping for tr3 Triumph 12
S TR2/3/3A door capping with buttons Triumph 8
Rut TR4/4A Door capping Triumph 7
B Door Capping on a TR3 Restoration & Tools 0
PeterK TR2/3/3A How do I remove TR3 door capping Triumph 6
drooartz Spring service of the 4-door Sprite (Morris Minor) Spridgets 5
A 100/6 BN4 Door Lock Austin Healey 15
SpeedyG TR4/4A Door window regulator spring Triumph 5
SpeedyG TR4/4A Interior door handles and escutcheons Triumph 9
AngliaGT Wanted Two inside window handles & Regulator for Driver's Door - '67 GT MG Classifieds 6
AngliaGT MGB-GT WANTED: Driver's Door Regulator + Two (2) interior handles. MG 1
D Older door panel clips Restoration & Tools 4
BoyRacer Door Skin Removal Austin Healey 6
Southwarks TR2/3/3A TR2 door help! Triumph 2
M For Sale 2017 Jaguar F-TYPE Premium 2-Door Convertible for Sale mlbirk@aol.com Jaguar Classifieds 0
R MGB MGB Roadster Door Panel Speakers MG 9
D Top Door rubber and fuzzy seal Spridgets 5
J For Sale Triumph TR3 door, left, for sale Triumph Classifieds 0
Popeye TR4/4A Door seal channel near top of windscreen Triumph 6
fordmstr 73 Midget rocker panel end caps and door handle gaskets advise Spridgets 3
D MGB Older style door pulls MG 0
V Door Seals Austin Healey 8
Bayless Door seal question Spridgets 3
B BJ7/BJ8 Door Check Straps Austin Healey 10
Donald1107 TR2/3/3A Door hinges Triumph 14
algot1901 1950 Prefect E93A-946480 - door bottom rubber Other British Cars 14
D Door Seal Fit Austin Healey 18
D For Sale BT7 interior door cards - new ! Austin Healey Classifieds 0
E 3000 Healey Door Checks Austin Healey 1
A MGB MGB a glove box door MG 10
chicken BJ7 Door Fit Austin Healey 27
Patrick67BJ8 Glazing Door Window Glass in BJ8 Austin Healey 15
F Door Panel Hardware Austin Healey 3
LAW75 Door Latch Adjustment Austin Healey 22
BoyRacer Door Panel Measurements Austin Healey 3
LAW75 BJ8 Door Locks Austin Healey 2
Cappy Occasional Door Malfunction Austin Healey 1
nichola TR6 Door handle and window crank installation Triumph 0
J Door Draught Metal Clips Austin Healey 4
F Interior Door Handle Removal Austin Healey 2
F Wanted wanted new old stock driver side door latch Triumph Classifieds 2
F TR2/3/3A looking for door latch review Triumph 7
Joel Lester TR2/3/3A Looking for helpful hints for door hinge screw removal Triumph 17
M Spitfire 1500 LH Door Triumph Classifieds 0
chicken Healey BJ7 door (i think) Austin Healey Classifieds 0
chicken BJ7 Door Seal Austin Healey 5
chicken Inner Door Seal Trim Position Austin Healey 6
Lotuswins TR4/4A Is this normal? TR4 gap between door and cowl Triumph 10
Popeye General TR FS2758 alternate - Door Pull Assembly Triumph 2
G Wanted - Glove Box Door for a TR3A Triumph Classifieds 2

Similar threads

Top