I am just finishing the restoration of my 54 TR-2 Long Door. The engine has been rebuilt and a new clutch installed. The Master Cylinder and Slave Cylinder are new.
I have bled the system but the slave cylinder is apparently not moving the clutch lever enough for it to go into gear. It moves about 2", but not enough for the throw bearing to release the pressure plate. All I get is a noisy grind, when trying to put it into gear?
Dick Vinal
I have bled the system but the slave cylinder is apparently not moving the clutch lever enough for it to go into gear. It moves about 2", but not enough for the throw bearing to release the pressure plate. All I get is a noisy grind, when trying to put it into gear?
Dick Vinal