Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
kennypinkerton
Yoda
Offline
If given the choice - and the money was available for either - I'd go stock, or stock with overdrive. Keep it in the family - so to speak.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
MGB 1973 MGB help Please
- Thread starter 53caddy
- Start date
Share this page
tony barnhill
Great Pumpkin - R.I.P
Offline
[ QUOTE ]
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
OP
53caddy
Senior Member
Offline
[ QUOTE ]
[ QUOTE ]
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
[/ QUOTE ]
nothing but. i think i need to rebuild it before i restore the car to it fullest
[ QUOTE ]
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
[/ QUOTE ]
nothing but. i think i need to rebuild it before i restore the car to it fullest
jdeluke137
Member
Offline
I'm not expert - I've only been working on these cars for about a year - but I have learned the hard way that "if it ain't broke, don't fix it."
Scott_Hower
Luke Skywalker
Offline
[ QUOTE ]
[ QUOTE ]
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
[/ QUOTE ]
Agreed. Replace the front and rear gearbox seals and the front and side gaskets. Drain the oil and refill with Redline MT90 (pretty sure I was advised to use MT90 instead of MTL, I forget). Replace the nylon bushings in the tower and the switches and flush the breather you're all set.
An impact wrench with the correct socket (1 5/16 ... 1 1/8?) and some long drilled angle iron to bolt up the flange will make short work of removing the tailshaft nut.
[ QUOTE ]
i have to rebuild the tranny i have
[/ QUOTE ]
What makes you think the transmission needs rebuilding - those things are virtually bulletproof! What's it doing?
[/ QUOTE ]
Agreed. Replace the front and rear gearbox seals and the front and side gaskets. Drain the oil and refill with Redline MT90 (pretty sure I was advised to use MT90 instead of MTL, I forget). Replace the nylon bushings in the tower and the switches and flush the breather you're all set.
An impact wrench with the correct socket (1 5/16 ... 1 1/8?) and some long drilled angle iron to bolt up the flange will make short work of removing the tailshaft nut.
Scott_Hower
Luke Skywalker
Offline
[ QUOTE ]
well what if it has been sitting for like 20 years in a barn and out in the weather.
[/ QUOTE ]
Don't fret. Tony had sound advice. Replace the perishable bits (as described above) and it should be fine.
well what if it has been sitting for like 20 years in a barn and out in the weather.
[/ QUOTE ]
Don't fret. Tony had sound advice. Replace the perishable bits (as described above) and it should be fine.