Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I wanted to make this post on hopes that it might help someone planning a restoration of their spridget. I had been researching plans to build a body otisserie so that I could strip and repaint the bottom of my BE. I found links to plans using two engine stands, one with 4x4 posts secured to rafters and one using a simple frame.
I decided to try the simple frame made of a 48"x48" piece of 3/4" plywood and 5 2x4s. Total cost was roughly $50. I spent around 2 hours today building the frame and mounting my stripped shell into it. I was able to flip the car on its side then onto its back by myselft with little effort.
I plan to post some pics for thos who havent seen one of these. Until then here's the link to the plans and original pictures.
https://www.gerardsgarage.com/GarageContent/rollover%20frame/rollover.htm
Ben in SC
I decided to try the simple frame made of a 48"x48" piece of 3/4" plywood and 5 2x4s. Total cost was roughly $50. I spent around 2 hours today building the frame and mounting my stripped shell into it. I was able to flip the car on its side then onto its back by myselft with little effort.
I plan to post some pics for thos who havent seen one of these. Until then here's the link to the plans and original pictures.
https://www.gerardsgarage.com/GarageContent/rollover%20frame/rollover.htm
Ben in SC
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.