D
DougF
Guest
Guest
Offline
I started fixing up carbs for the new manifold last night. I'm working on a pair that were on my car for several years and I just couldn't get them tuned in properly.
Tonight I disassembled and cleaned one. I found the bypass valve diaphragm has a large hole in it. But I also found that some DPO had forced the throttle butterfly into the the carb body enough that it put small gouges near each side of the throttle shaft. This didn't allow the disc to seat properly. If it doesn't fit, force it. They never cease to amaze me.
I think it might work now.
Tonight I disassembled and cleaned one. I found the bypass valve diaphragm has a large hole in it. But I also found that some DPO had forced the throttle butterfly into the the carb body enough that it put small gouges near each side of the throttle shaft. This didn't allow the disc to seat properly. If it doesn't fit, force it. They never cease to amaze me.
I think it might work now.