• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR6 Drive shaft orientation

Share this page

R

Ribbs

Senior Member
Country flag
Offline
What is the proper orientation for the drive shaft? Does the telescoping end go towards the gearbox or towards the differential. I can't find a detail in any catalogs/manuals and I didn't pay attention when I pulled it a year ago.
 
OP
R

Ribbs

Senior Member
Country flag
Offline
Thanks Berry, I couldn't see that it made any difference either but wanted to follow how it was oriented from the factory. Towards the gearbox it is!
Dave
 
Similar threads
Thread starter Title Forum Replies Date
RJS TR4/4A Drive Shaft - Prop Shaft Alignment and Balancing Triumph 8
OZ_BN1 Drive Shaft Universal Joints Austin Healey 2
C Bugeye propeller/drive shaft- universal joint Spridgets 1
71TR6 TR2/3/3A TR3A Drive shaft cork seal Triumph 10
L TR2/3/3A Drive shaft question Triumph 5
J Wanted Front Yoke on Drive shaft Spridgets Classified 2
R TR2/3/3A Maintenance on Drive Shaft Triumph 18
B Transmission rear bush for drive shaft yoke - no joke! Spridgets 2
PAUL161 T-Series Balancing Drive Shaft MG 4
Gliderman8 TR6 One piece drive shaft? Triumph 6
B TR2/3/3A Transmission / drive shaft knock ?? Triumph 16
R Drive shaft universal joint bear cap modification Austin Healey 7
Got_All_4 General Tech Getting the nut off for J Type drive shaft flange Triumph 3
S How much grease for the drive [prop] shaft plunger Austin Healey 3
S TR2/3/3A Distributor drive shaft play Triumph 4
S TR2/3/3A distributor drive shaft gear Triumph 4
CJD TR2/3/3A Overdrive Drive Shaft Triumph 4
M Really dumb question related to turning back wheel and drive shaft Spridgets 4
B Spitfire How do you replace U Joint on late model Spitfire OD Prop/Drive shaft? Triumph 7
W Drive shaft question Spridgets 8
B TR2/3/3A oil pump drive shaft removal challenge on TR3 Triumph 14
D Paint the drive shaft... Spridgets 6
J TR6 TR-6 Drive Shaft Removal ? Triumph 4
T Question on Serviceability of Drive Shaft Componen MG 2
B Overdrive drive shaft? MG 8
AEW what is the short drive shaft? Triumph 5
pjsmetana New Lugnuts? Drive shaft Play? Triumph 7
MGTF1250Dave TR2/3/3A TR3 Drive Shaft Grease nipple Triumph 4
A Drive Shaft plat at differential MG 2
drooartz Which drive shaft? Spridgets 13
P Drive shaft won't come out of the transmission Spridgets 6
mountainman TR 3 Drive Shaft Question Triumph 6
jhorton3 Drive Shaft Spridgets 0
N TR6 Bolt size for TR6 Drive shaft? Triumph 6
ronzet MGA Late MGA 1500 Drive shaft dust cover MG 0
prb51 TR2/3/3A TR3 drive shaft flange issue Triumph 1
G How do I separate my drive shaft to lube splines Triumph 4
B TR6 TR6 Drive Shaft Cover Triumph 7
D drive shaft/rotor alignment British Motor Corp 3
guzzul Drive Shaft Balance Triumph 8
jlaird I need a drive shaft, Tony or anyone. Spridgets 9
H Towing 62BT7 with Drive Shaft Connected Austin Healey 4
M MGB Drive Shaft U-Joint, 1978 MGB MG 4
B Drive Shaft Austin Healey 12
D Used Drive Shaft Coupling Needed British Motor Corp 0
D Unequal Drive Shaft Lengths British Motor Corp 3
T Mini drive shaft nut size. British Motor Corp 2
svtmikey Getting the hub off the drive shaft Triumph 3
AngliaGT Anyone Looking for a '28 Buick Drive Train for FREE? Other Cars 0
M TR2/3/3A HVDA Speedometer Drive Triumph 10

Similar threads

Top