• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Getting closer...

David_Doan

Jedi Warrior
Country flag
Offline
Seems like progress keeps slowing, but I'm almost done


  • Wired tail-lights (its really hot in a trunk that doesn't open)
  • Installed front flashers and headlights, some final wiring left
  • Attached front tilt bonnet (hood)

Continuing to eliminate the old bullet connectors, I "upgraded" the flasher sockets:

IMG_06751.jpg


IMG_0782.jpg


Here's a few pics of the front tilt and bonnet:

IMG_0785.jpg


IMG_0786.jpg


IMG_0789.jpg
 

JPSmit

Moderator
Staff member
Silver
Country flag
Online
that looks so clean
 
Similar threads
Thread starter Title Forum Replies Date
Celtic 77 MGB Getting closer! MG 5
tr6nitjulius General TR Part 4 What We Missin' we getting closer Triumph 0
RAC68 3D Printing Getting Closer Austin Healey 16
B getting closer...only took about 8 years! Spridgets 4
Jim_Gruber Spring is getting closer - What Spridget Winter projects do you still need to finish Spridgets 13
R Getting Much Closer Triumph 73
T Getting closer on the inner fender Triumph 3
regularman Getting much closer Spridgets 2
jlaird Progress, getting closer Spridgets 6
billspohn MGA MGA V6 Getting Closer to End MG 2
R IRS Getting closer to assembly Jaguar 1
K TR2/3/3A Getting a cylinder head skimmed for flatness.... Triumph 1
S TR2/3/3A getting the circlip off 3rd gear Triumph 9
J Finally getting (re) started on the Bugeye Spridgets 27
JohnGone MGB Help getting my 1980 MGB to pass CA smog test MG 19
J TR4/4A Getting electrical shock from horn button when using the horn. Triumph 9
D TR2/3/3A Getting difficult to start. Triumph 6
S TR2/3/3A problems getting the engine to run correct Triumph 21
J MGB 73 getting loud squeal with acceleration MG 11
steveg Toyota W58 Trans Hard Getting Into Gear Austin Healey 8
M Getting behind the dash on BJ8 Austin Healey 4
John Turney Getting Speedometer out of the Case Austin Healey 6
HealeyPassion Getting a bit more space for triple Webers... or EFI Austin Healey 3
Rob Glasgow Getting Ready for Winter Austin Healey 24
BoyRacer Need Tips on getting wiring harness through firewall Austin Healey 4
J TR2/3/3A Finally getting started Triumph 20
glemon GT6 GT6 Getting Some Recognition Triumph 8
K TR2/3/3A Dismantling Speedometer...getting the odometer pin past the case??? Triumph 2
bighealeysource Getting rid of pesky rubbing/polishing compound overspray Austin Healey 5
Jagguy MGB Ignition timing issues....I'm getting confused! MG 16
steveg Really Getting Into one's Healey Austin Healey 17
M TR5/TR250 problem getting engine running Triumph 15
simon1966 Seats upholstered and the shrouds getting cracks fixed Austin Healey 9
Jim_Gruber Brake Light - Getting them working Spridgets 8
Darrell_Walker General TR TR3A on Comedians in Cars Getting Coffee Triumph 7
S TR2/3/3A getting a new multi meter Triumph 9
gbtr6 TR6 Getting frustrated getting my TR to run properly Triumph 17
RickB MGB Rain water getting inside behind dash MG 17
drambuie Getting more horse power from a Healey 100 Austin Healey 63
J TR2/3/3A Joe the TR3 Guy getting started with suspension Triumph 4
Jim_Gruber 1/4 Elliptics- Getting the Bast__rd Apart Spridgets 22
steveg HD8s - getting below 1000 rpm idle Austin Healey 4
steveg Unable to edit posts, getting a wierd message FORUM Navigation Questions 2
RickPA Getting back in the game Austin Healey 5
D Getting hot in the car [AH3000mk3] Austin Healey 6
Got_All_4 General Tech Getting the nut off for J Type drive shaft flange Triumph 3
T Spitfire Randall - anyone you would recommend for getting a driveshaft shorted in SoCal Triumph 4
Jim_Gruber Help Needed, getting those 1/4 Eliptics out of the spring mounting box Spridgets 24
B TR2/3/3A Is a 63 TCF probably needing total restoration worth getting into? Triumph 16
Boink Comedians in Cars Getting Coffee - SAAB Other Cars 0

Similar threads

Top