• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Rattling Noise while Clutch is Partially Engaged Clutch

gonzo

Jedi Warrior
Country flag
Online
So what’s this new rattling noise while clutch is partially engaged, and then subsides when fully engaged? Investigating the usual items:
Exhaust downpipes and system are rattle-free. GR starter is working nicely and not hanging up or banging around. Clutch, pressure plate and TO bearing have about 15 – 20K miles and as many years old. Initial thoughts are TO bearing , pressure plate or both. Arrgg
Preparing for the Monterey Meet in September and will be putting about 800 miles on the car. This new noise is worrisome. Any shared thought are much appreciated!
 

Keoke

Great Pumpkin
Country flag
Offline
Yeah it could be both.

However, a few years ago I ran in to something similar to this, shortly after a clutch rebuild the throw out bearing had worn down to the metal retainer-don't know why ?
 
OP
G

gonzo

Jedi Warrior
Country flag
Online
The clutch is probably fine since it passed the 2nd gear / handbrake test and stalled the engine. I'll try to isolate the rattling to bellhousing later today. If any of the clutch components need replacing - TO, Pressure Plate, Clutch Disk, then all will be replaced. Wear pattern on flywheel will be checked too. To clarify, rattling occurs while in any gear and clutch is near engagement; so there was some rattling going on while the clutch test was being performed. Easy to reproduce, but I hope it doesn't add other elements into the equation, like engine or tranny. Thanks HealeyRick and Keoke.
GONZO
 
OP
G

gonzo

Jedi Warrior
Country flag
Online
So here's an update: rattling noise localized to bellhousing when clutch and gear are nearly engaged. Just whirling noises when clutch is otherwise fully engaged or disengaged. So transmission will be removed this weekend to further assess clutch mechanism - but the plan is to replace T/O bearing, Clutch and Pressure Plate. Early BJ7, so this is the 10 in. one. Checked records and clutch assembly was replaced by me in Aug 1983 and then in June 1998. Both times the Spigot Bush / Pilot Bearing / Bush in the crankshaft was not replaced. So question: When is it advisable to replace the Pilot Bearing / Bush? Is it difficult to remove? Thanks GONZO
 

Bob_Spidell

Yoda
Gold
Country flag
Offline
... When is it advisable to replace the Pilot Bearing / Bush? Is it difficult to remove? Thanks GONZO

Whenever you have the gearbox out and, preferably, the pressure plate removed. My engine builder screwed a large bolt or tap into the bush and pulled it out. You can also chisel it to break it up, but you risk damaging the hole in the flywheel. New ones should usually be soaked in hot oil for a few hours before installing. Yours may very well be the cause of the noise.
 

Jack T

Jedi Trainee
Country flag
Offline
I found a bolt just slightly larger than the diameter of the bushing ID, and threaded it in like a tap. Remove the bolt, shoot some grease into the recess, and reinstall the bolt. Worked like a charm.
 
OP
G

gonzo

Jedi Warrior
Country flag
Online
Transmission pulled and clutch parts inspected: clutch, pressure plate and T/O bearing - all authentic Borg and Beck with stampings - are in excellent shape with minimal wear. Rivets on clutch are recessed well below friction material. However, the pilot bearing / bush is worn and will be replaced. These older parts with approximately 20K miles on them appear in better shape compared to the new "Borg and Beck /AP" clutch kit parts just delivered. And the new parts don't have any B and B stampings on them! Not even the helpful "Flywheel Facing" stamp on clutch disk! Suspect quality is disappointing. Any thoughts would be appreciated.

With a good cleaning, the old original B&B parts will be reused. Then it'll be time to buttoning this thing up and drive! Thanks all. GONZO
 

Bob_Spidell

Yoda
Gold
Country flag
Offline
Where did you get the parts? Have heard from a reliable source that people are putting counterfeit parts in genuine Lucas boxes bought at flea markets. Maybe something similar is happening with drive train parts?
 

Keoke

Great Pumpkin
Country flag
Offline
Last edited:

Keoke

Great Pumpkin
Country flag
Offline
In any case, the blows struck in the video looked to be softer than used with nails and cushioned by the grease

Yeah John but it sure is a nasty way to do it!----LOL
 
Last edited:
OP
G

gonzo

Jedi Warrior
Country flag
Online
Here are a couple of pics of clutches: one pulled from car with 20K and 20 years on it and the new replacement one. The new clutch has thinner clutch material than the old one. Why is that? Is this typical of new clutches from our suppliers? GONZO

Original Clutch 20K Miles2.jpgNew Clutch AP.jpg
 

Keoke

Great Pumpkin
Country flag
Offline
Here are a couple of pics of clutches: one pulled from car with 20K and 20 years on it and the new replacement one. The new clutch has thinner clutch material than the old one. Why is that? Is this typical of new clutches from our suppliers? GONZO

View attachment 49905View attachment 49904

This is typical today in most of our consumer products it is used to control their product price.
Usually involves a smal price increase but there is less in the pkg, thus preserving their bottom line.

The new style disk you show will work fine.
 
OP
G

gonzo

Jedi Warrior
Country flag
Online
Rattle noise likely due to worn Pilot Bush, so that'll be replaced but the original clutch parts are going back in since they're still serviceable. Is this "false economy" or should the new parts - which are representative of what's now available from profit-driven manufacturers - be installed? Oh, re-read Keoke message, new parts will be installed, but I'll keep the old ones. GONZO.
 
Similar threads
Thread starter Title Forum Replies Date
B High-Torque Starter Rattling Noise Austin Healey 3
2billydavies TR2/3/3A rattling noise on TR3a Triumph 12
K TR2/3/3A Anyone remember the "rattling gear shift" fix? Triumph 8
K TR2/3/3A Rattling from the gearshift or that end of the gearbox.... Triumph 7
T Rattling stainless muffler Austin Healey 10
John_Mc OT-Hey Tinster, feel any rattling down your way? Triumph 7
RandallRK Rattling door Austin Healey 1
B 1500 Rattling Trans Cable Strap? Spridgets 5
bighealeysource rattling doors on a BJ8 Austin Healey 3
W Rattling hood/bonnet MG 4
healeynut Low end rattling - 100 motor Austin Healey 8
A Why is my car making this noise? FORUM Navigation Questions 0
Popeye TR4/4A Transmission noise - intermittent Triumph 22
AUSMHLY Transmission Noise Austin Healey 11
Gliderman8 TR6 Lever shock noise Triumph 18
LAW75 High-Pitched Noise Austin Healey 13
nicko Strange Engine Noise Austin Healey 7
Sarastro TR4/4A Identifying the source of gear noise. Triumph 15
Martinld123 Steering Idler Noise Austin Healey 21
S TR2/3/3A Noise from clutch area? Triumph 20
P TR6 Clutch pedal click noise Triumph 2
I T-Series air cleaner/ noise suppressor MG 1
L TR2/3/3A Noise seemingly from Distributor drive gear Triumph 15
P TR6 Clutch pedal noise Triumph 2
P TR6 Clunking noise in rear continuing Triumph 39
R Clutch Throwout Bearing Noise? Austin Healey 2
Gliderman8 TR6 What's that knocking noise? Triumph 6
Kleykamp TR2/3/3A Engine noise Triumph 4
SherpaPilot Strange Noise While Cornering in TR6 Racing 3
H TR6 1974 TR6 clutch noise when pedal is depressed Triumph 3
F TR2/3/3A Strange Loud Noise Triumph 11
Michael Oritt Clutch-related noise Austin Healey 14
B An expensive sounding noise possibly the transmission Austin Healey 7
M TR2/3/3A Annoying Vibrating noise?? Triumph 11
M TR2/3/3A Grinding noise when trying to start sometimes? Triumph 10
johnrip Wedge TR7 had replaced rotors, now I have a noise and vibration-Wheel Bearing? Triumph 4
G Tappet Noise Austin Healey 8
TulsaFred Generator or water pump noise? Spridgets 20
S Disconcerting engine noise, please help if you can. Austin Healey 56
J MGB Project car done; front end clunk noise while braking MG 4
P MGB MGB overheating with a squealing noise from the engine MG 11
RAC68 Loud Trans Scrapping Noise Austin Healey 9
J Fan Type Noise on Ignition Switch in Accessory Austin Healey 9
K TR2/3/3A Gearbox noise.... Triumph 8
P TR6 Rear suspension noise Triumph 3
D Ticking noise when driving Austin Healey 8
bugedd Rear end noise [insert joke] Spridgets 11
Lukens TR2/3/3A Cog v-belt causing noise. Triumph 8
P TR6 Clunking noise in rear Triumph 2
busybrit MGB Slight starter motor noise MG 5

Similar threads

Top