• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

D would anybody be able to tell the correct way to static time a essex v6 I have tried and failed cheers garth

Share this page

G

Garth

Freshman Member
Country flag
Offline
Would anybody be Able to tell me how to static time a essex v6 I have taken distributer out some time ago placed it back won’t start thanks garth
 
Number 1 cylinder at tdc, Check dizzy for correct #1 to that cylinder. Sometimes try 180* off. Move wires if you have to. Use a test light on points to set dizzy also. Have been known to use trial and error.
 
Last edited:
As said above, but I would remove the valve cover on #1 side and watch the valves “rock” to be sure you are on the correct stroke.
Skinny screw driver also helps as the piston comes up the bore.
 
Did not know how far he could go. Thanks, Grantura_MKI.
 
LarryK said:
Number 1 cylinder at tdc, Check dizzy for correct #1 to that cylinder. Sometimes try 180* off. Mobe wires if you have to. Use a test light on points to set dizzy also. Have been known to use trial and error.
Click to expand...
Many thanks👍
 
Back
Top