• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Redi-Sleeve for Spitfire?

Share this page

Basil

Basil

Administrator
Boss
Offline
Does anyone know if they make a "redi-sleeve" (I think that's what its called. For a Spitfire 1500 crank?
 
H

Healeysince59

Jedi Warrior
Country flag
Offline
Go to a a bearing house with the crank diameter and length of surface and chances are they will come up with one. They're pretty generic.

That said, I just looked in the Moss cat. P/N 520-510, "SPEEDI-SLEEVE, timing cover seal, 1500"

Marv J
 
H

Healeysince59

Jedi Warrior
Country flag
Offline
I just read your other posts and realize you are probably talking about the rear c/shaft seal surface. In that case my first response applies.

Marv J
 
ChrisS

ChrisS

Jedi Knight
Offline
Basil, I don't have the speedi-sleeve part # but the Moss # would be 520-530. It should be the same for a Midget 1500, Spitfire 1500 and the TR250/6. It will be cheaper to go the the local bearing shop though.
 
ChrisS

ChrisS

Jedi Knight
Offline
I think the speedi-sleeve part # is 99887. The rear seal should be a National 143456 / SKF 28655. The recommended sleeve for a 28655 is the 99887 which is for a 2.875" shaft.
 
OP
Basil

Basil

Administrator
Boss
Offline
Thanks! By the way - the link "Here" to this Spridgets form on your web site is pointing to the OLD forum directoty. YOu need to update your Link /bcforum/images/%%GRAEMLIN_URL%%/laugh.gif
 
Similar threads
Thread starter Title Forum Replies Date
Scott_Hower Redi-Strip/Kwik-Strip in Allentown,PA... Restoration & Tools 5
Joel Lester TR2/3/3A What size speedi-sleeve needed for pinion seal on a TR3? Triumph 6
M TR2/3/3A Speedy Sleeve Repair Sleeves for Rear Axle Pinion and Half Shafts Triumph 1
Lin Thermostat and blanking Sleeve question again Austin Healey 7
K TR2/3/3A TR3 Tie Rod Sleeve Triumph 2
K Wanted TR3 Tie Rod Sleeve Triumph Classifieds 2
Michael Oritt Speedi-sleeve p/n needed Austin Healey 7
Healey Nut Thermostat blanking sleeve Austin Healey 13
RAC68 Radiator Core Replacement and Sleeve Thermostat Alternatives Austin Healey 20
Jim_Gruber Hubs a Rocking on side where Speedi Sleeve was installed Spridgets 5
R TR6 bronze sleeve for release bearing Triumph 1
M TR2/3/3A Sleeve and Piston Sizes Triumph 6
Jim_Gruber Speedi Sleeve Install and New Diff Gasket Spridgets 5
Jim_Gruber Speedi Sleeve required for this application - Need advise! Spridgets 12
T TR4/4A Release Bearing Sleeve Triumph 0
Michael Oritt Speedi-sleeve part number Spridgets 0
K TR2/3/3A Clutch and Gearbox Sleeve Differences. Triumph 12
M TR2/3/3A TR3 overdrive trans rear speedi sleeve Triumph 6
BoyRacer Top bows - plastic sleeve for socket Austin Healey 0
K TR2/3/3A When assembling a release bearing to the sleeve? Triumph 4
R TR2/3/3A Steering, stator tube compression sleeve? Triumph 4
K TR2/3/3A What's the easiest way to remove the clutch release bearing from the bronze sleeve? Triumph 7
B TR2/3/3A TR3 Cylinder Sleeve Installation Triumph 10
T SKF Speedi-sleeve p/n for tailend of transmission? Triumph 3
B inner bushing sleeve on pin? Triumph 5
K TR4/4A Paging TR4nut re Timken speedi sleeve? Triumph 4
K TR2/3/3A Tr3:installing a speedi sleeve timing chain cover? Triumph 4
B TR6 TR6 Front Oil Seal Sleeve Triumph 3
M Speedi sleeve question Triumph 7
PatGalvin TR2/3/3A Wet Sleeve to Engine Block Deck Clearance, TR3A Triumph 4
mgnewbie Speedi-sleeve for the gearbox rear oil seal MG 7
W Suggestions on wiring sleeve Spridgets 3
lorendad Speedi-sleeve Triumph 10
M Cylinder sleeve protrusion Triumph 4
T Apple Hydraulics for M/C re-sleeve Triumph 11
Ohiobugeye Bugeye Fuel Line Nut & Sleeve For Gas Tank Spridgets 12
I TR6 TR6 Trunion installation/stop sleeve help Triumph 4
dklawson Spitfire Spitfire - Trunion Bushing/Sleeve Clearance? Triumph 2
KVH Revelation Re Those Figure 8 Sleeve Gaskets Triumph 8
ronzet MGA MGA 1500 Thermostat Blanking Sleeve MG 22
prb51 TR2/3/3A TR3 Dif Pinion seal and speedy sleeve Triumph 12
budk1953 Speedi-sleeve Spridgets 11
W TR6 TR6 Crank oil seal sleeve Triumph 4
P thermostat/blanking sleeve? MG 5
MGTF1250Dave Speedi-sleeve for Timing Cover Seal Triumph 15
G Oil Seal Sleeve......This is getting to be a pain Triumph 0
Steve P. master brake/clutch re-sleeve...suggestions Spridgets 3
motzart007 Wanted In search of used seats for 1969 Triumph Spitfire MKIII Triumph Classifieds 0
B For Sale GT6/Spitfire License Plate Light Assembly Triumph Classifieds 0
S Spitfire Triumph Spitfire 1300 engine SU carb problem Triumph 10

Similar threads

Top