• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Laygear thrust washer for ribcase gearbox

Share this page

Gerard

Gerard

Luke Skywalker
Country flag
Offline
I'm trying to finish assembling a ribcase gear box and in need of a laygear thrust washer .030-.031. Moss part number 461-935. Moss does not have any and there has no delivery date for more. VB doesn't even offer them. If anyone has any they can put a set of calipers to and can come close, please let me know.

Thanks!
 
N

nomad

Yoda
Offline
Got one Gerard but NOOO idea where it is!!! Of course that means I haven't measured it either! Better go with Mike.

Kurt
 
S

Spridget64SC

Jedi Trainee
Offline
Just back from the drivers school at Roebling Road. Had 40 cars. Only one very nice Spridget. It ran flawlessly all weekend and the driver got his novice permit school requirements signed off. Instructed a Datsun 240Z, Porsche 944 and Honda Prelude. All SCCA regional ITS class. Cold, Windy but dry.

The 0.030-0.031" thick thrust washers are fairly rare, but I'll look tonight and see if I have any. Have lots of the 0.020"ish range.

Mike

PS: I'm chasing the centerline measurements from the mainshaft to the layshaft. Anyone got a specification on this measurement?
 
OP
Gerard

Gerard

Luke Skywalker
Country flag
Offline
Spridget64SC said:
The 0.030-0.031" thick thrust washers are fairly rare, but I'll look tonight and see if I have any. Have lots of the 0.020"ish range.

Mike

PS: I'm chasing the centerline measurements from the mainshaft to the layshaft. Anyone got a specification on this measurement?
Click to expand...

Hi Mike,

Don't spend a lot of time at this point looking for one. I believe I have found a source in the UK though one of my favorite Morris Minor suppliers. I have to order some other parts from them anyway. If it turns out they don't have one, I'll be in touch.

Thanks!
 
S

Spridget64SC

Jedi Trainee
Offline
Looked through the parts drawer last night. Measured 41 laygear thrust washers on the first gear end. 0.120" to 0.126". Most in the lower end of range. Only one at 0.126", none up at the 0.130" range. Sorry. Maybe some more hiding in other places, but best bet might be your source in the UK.

Mike
 
Similar threads
Thread starter Title Forum Replies Date
AUSMHLY Remanufactured Laygear with welded 1st gear Austin Healey 20
AUSMHLY Laygear End Float BN1-BJ8 Austin Healey 2
AUSMHLY BJ8 Laygear Replacement Options Austin Healey 0
AUSMHLY BJ8 Laygear Wear Austin Healey 11
S T-Series laygear MG 13
AHS TR4/4A TR4 Laygear circlip - or lack thereof Triumph 5
S Rounded teeth laygear mesh with chamfered teeth? Austin Healey 1
Johnny BJ8 Laygear and baulk rings Austin Healey 2
B TR6 Thrust face repair Triumph 1
KVH General Tech Thrust Washers Triumph 2
newmexTR3 TR2/3/3A How to remove thrust washer from lower wishbone & trunion Triumph 7
B TR4/4A Thrust washer issue Triumph 11
P TR2/3/3A Crankshaft Thrust Washers Triumph 4
JPSmit Midget Thrust bearing coonversion Spridgets 9
Csarneson Source for Distributor Fiber Thrust Washer Austin Healey 3
K Thrust washer Austin Healey 4
J TR6 Thrust washers in sump Triumph 4
J TR2/3/3A Crankshaft thrust washers. Triumph 2
PeterK Wedge TR7 thrust washer Triumph 0
B TR2/3/3A where to buy oversize thrust washers for TR3B? Triumph 16
H 4.2L distribitor drive distance/thrust washer Jaguar 0
M Healey Crankshaft Thrust Washer Thickness Austin Healey 3
P those infernal thrust washers Triumph 11
H Crankshaft Thrust Washers Austin Healey 2
O Spitfire Spit 1500 Thrust Washers? Triumph 13
6 thrust washers & cam Triumph 7
Monark192 MGB MGB Diff Thrust Washer Question MG 2
S Tachometer thrust button Austin Healey 1
T ever see a rusty thrust washer? Triumph 10
T crank thrust bearings Triumph 5
TR6oldtimer TR6 Worn Thrust Bearings TR6 Triumph 26
K TR2/3/3A TR3 thrust washers wishbone arm to trunnion ? Triumph 6
Jim_Gruber Wheel Bearings and Thrust Label Spridgets 6
healeyboz replacing a thrust bushing Spridgets 6
M pining the thrust washers on 1500cc Spridgets 10
M Layshaft thrust washer dimensions MG 1
B 1500 thrust washer Spridgets 10
Brosky Thrust washers, via Scott Helms and my way Triumph 8
JPSmit 1500 thrust bearing question Spridgets 10
2wrench Checking the thrust washers.....Dale? Triumph 3
Brosky TR6 Serious Thrust Washers for TR6 Triumph 24
Moseso Thrust Washer Dimension Question Triumph 3
B Sealing block and good thrust washers Triumph 5
2wrench Let's talk about the dreaded thrust washer wear. Triumph 8
B Pinning 1500 Thrust Washer Spridgets 3
Brosky Thrust Bearing Issue Triumph 22
floyd TR6 75 tr6 thrust washers Triumph 18
guzzul When thrust washers go bad Triumph 11
tomshobby thrust bearings Triumph 1
hondo402000 TR6 TR6 thrust washer question Triumph 3

Similar threads

Top