• Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Engine hoist--buy or rent

drooartz

Moderator
Staff member
Gold
Country flag
Offline
I've got at least 3 engine remove or install operations to do in the next year or so. 1275 out of donor, 948 out of Bugeye, 1275 into Bugeye. Can't be done all at the same time, since I'm hoping to pull the 1275 this month, and wouldn't be installing it into the Tunebug until next summer, probably.

So I'm looking at 2 - 3 rentals, or just going out and buying one. Of course, then you have to store it, but that is usually workable somehow. Harbor Freight always has a few on sale, it seems.

Thoughts? These things worth having around?
 

tony barnhill

Great Pumpkin - R.I.P
Offline
Wouldn't be a garage without one! Get the one with folding legs.
 

tony barnhill

Great Pumpkin - R.I.P
Offline
Yep - that works!
 

weewillie

Darth Vader
Country flag
Offline
that's like the one I have and it's worth it's weight in gold. The footprint is like 32" X 34"
 

LLAngus

Jedi Knight
Offline
Got one, too!! Love it. The daughter and I are arguing about who gets it when she gets a project car in Oregon. GO Beavers!!! /ubbthreads/images/graemlins/driving.gif
 

Steve_S

Yoda
Offline
My tool philosophy:

Need a tool once? Borrow it.

Need a tool twice? Rent it.

Need a tool three times? Buy it.

And if you need a tool badly enough to buy it, buy a good one.
 

Bugeye58

Yoda
Offline
Drew, at that price it's cheaper to buy than rent. I have one that looks identical to that, and it's served me well over the last 8 years or so. The only thing I've done to make it more user friendly was to install a swivel where the lift chain hooks up, and replace all the Chinese bolts with better quality fasteners.
I would also suggest something along the lines of an Oberg tilt attachment.

Oberg: https://www.thestricklincompanies.com/html/other/op.html
Jeff
 
Country flag
Offline
I've got one and its great for when you need it, and the rest of the time it has to hide somewhere out of the way.

One point is its capacity:
[ QUOTE ]
Boom extension capacities: 1 ton @ 36-1/4", 3/4 ton @ 45-1/2", 1/2 ton @ 50-1/4", 1/4 ton @ 50-1/4"; Height capacities: 1 ton @ 82", 1/4 ton @ 94"

[/ QUOTE ]

If you'll have to use it at full extension it won't lift so much. Ask yourself how much you'll need to lift and how far out you'll need the boom for that.

1/4 ton @ 50-1/4" wouldn't cope with a Big Healey's needs very well, but for a Little Healey you'd probably be OK...
 

PAUL161

Great Pumpkin
Silver
Country flag
Offline
My son bought one and paid around $300 for it. Has to have top shelf equipment?? I bought one from a farm equipment supplier around here for $150 and except for the color, it's the same exact thing. The hyd. jack has the same part number stamped on it! Same capasity with folding legs. Go figure! I like mine better, it's blue. His is an ugly lime green. /ubbthreads/images/graemlins/devilgrin.gif PJ
 

rileyimp

Member
Offline
Used one just like Harbor Freight (except it was from Sam's Club) Pulled two E-Type motors, a Mustang and numerous 1275s. Had it six years and it's still going strong!!
 

bugimike

Yoda
Offline
I got the same thing at Pep Boys, they have the same one as harbor freight (only it is red) for $10 bucks less w/rebate!!
 
Similar threads
Thread starter Title Forum Replies Date
J For Sale Hoist and engine stand Triumph Classifieds 0
D engine hoist Austin Healey 11
R engine removal- where to connect hoist? Austin Healey 16
T engine hoist Austin Healey 14
B TR2/3/3A Pulling engine & trans on TR3B - hoist attach? Triumph 6
Morris Engine hoist... Spridgets 25
1 MGB-GT Engine hoist/crane boom length? MG 17
S Engine Hoist Restoration & Tools 13
Mickey Richaud Engine Hoist Restoration & Tools 17
vping Engine Hoist Bracket Spridgets 3
beez Lifting body with engine hoist Triumph 4
Basil Engine hoist info Restoration & Tools 5
mctriumph For Sale Tr7 engine Triumph Classifieds 0
mctriumph TR2/3/3A Weirdest engine failure Triumph 2
sim A-series Engine Block Search Spridgets 2
H "Failure to Proceed" (Engine Won't Fire) Austin Healey 9
L Engine ID British Motor Corp 4
J Can a TF engine be installed in a TD body? MG 7
K TR2/3/3A Coil against hot engine?.....relocating the coil? Triumph 11
C Engine Operating Temperature Austin Healey 21
CARSINC WANTED: 1275 Engine Spridgets 0
tinman58 TR2/3/3A Por-15 in engine block? Triumph 12
W BN4 Engine Mounts Austin Healey 2
B MGB while driving engine cuts out if I let off or push more throttle it comes right back on MG 5
nitro BJ8 Engine Design Austin Healey 1
S Spitfire Triumph Spitfire 1300 engine SU carb problem Triumph 10
G TR2/3/3A TS37903F Is my engine a TR3A engine because my starter says no. Triumph 3
Frameman 1949 Engine Misfiring & Starter Cranks Slowly When Hot Austin Healey 8
B Engine Stalls When Warmed Up Austin Healey 6
HealeyPassion AH Project: Cool Air to Engine Austin Healey 5
F Wanted BJ8 Engine Block Austin Healey Classifieds 1
R For Sale 100 engine block w/head Austin Healey Classifieds 3
R TR6 question re: Engine Oil Triumph 3
P General TR What color is original for engine parts? Triumph 7
AUSMHLY Clutch Stalls Engine Austin Healey 16
SherpaPilot TR6 Unidentified fitting on TR6 Engine Triumph 3
S TR2/3/3A "Vintage" engine analyzer tach unstable? Triumph 14
MikeAH100M High Temp Engine Miss Austin Healey 2
K TR2/3/3A Replacing engine and gearbox mounts? Triumph 8
KVH General Tech Engine Misses Only at 2200 rpm Triumph 12
S TR2/3/3A engine and trans are stuck together pretty well Triumph 8
Carlbanan56 MGB No spark and engine cranking slow MG 10
bigjones TR2/3/3A Starting up an engine that hasn't ran for a while. Triumph 39
tr6nitjulius General TR Waterless, easy/peasy, engine cleaning Triumph 2
Darwin Wanted Spitfire engine needed Triumph Classifieds 0
sim oil pressure gage bad or engine needs rebuild It starts our cold at 60 psi but when warm it down to 10 psi Spridgets 21
D A distributer question on the 1275 engine. Spridgets 7
SherpaPilot TR6 Engine Mounting Question Triumph 3
KVH General Tech Loud Metallic Click Pop Every Time After Engine Off Triumph 11
AUSMHLY Engine Flush After Head Gasket Leak Austin Healey 19

Similar threads

Top