Offline
I’ve shifted over to led positive ground turn signal lights using the original style Lucas flasher. I installed two 5-ohm 50W resistors to ground, one on each side, tapping in at the bullet connectors each side. I’m still getting hyperflashing and no clicking sound at the flasher. The resistors do get warm to the touch, so they are carrying current.
I pulled the flasher out and checked it with an incandescent 40W bulb, tested sat.
I’d have thought 5-ohms would have worked, but evidently not. A 3 or 4-ohm resistor may be needed to induce enough current to trigger the flasher. Anyone have any experience? Jim
TS 44743L “O”
I pulled the flasher out and checked it with an incandescent 40W bulb, tested sat.
I’d have thought 5-ohms would have worked, but evidently not. A 3 or 4-ohm resistor may be needed to induce enough current to trigger the flasher. Anyone have any experience? Jim
TS 44743L “O”