• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Water pump grease fitting. 60 TR3A post 60, 000

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
Reassembling, finally, my water pump and all related cooling parts. My pump has a grease fitting. What postion should it be in when the pump is assembled to the pump housing on the block?
Thanks, Tinkerman
 
On the top, and toward the right side of the engine (looking forward). Close to the generator.
 
Thanks! Thats where I figured but it is nice to have confirmation.

Tinkerman
 
The pump will only go on one way anyway, even without the grease fitting. The holes are not evenly spaced.
 
Mine has a 45° zerk which fortuitously points in a convenient direction. I think the zerk & pump are original.

H2OPumpZerk.jpg
 
Back
Top