• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Water pump grease fitting. 60 TR3A post 60, 000

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
Reassembling, finally, my water pump and all related cooling parts. My pump has a grease fitting. What postion should it be in when the pump is assembled to the pump housing on the block?
Thanks, Tinkerman
 
On the top, and toward the right side of the engine (looking forward). Close to the generator.
 
Thanks! Thats where I figured but it is nice to have confirmation.

Tinkerman
 
The pump will only go on one way anyway, even without the grease fitting. The holes are not evenly spaced.
 
Mine has a 45° zerk which fortuitously points in a convenient direction. I think the zerk & pump are original.

H2OPumpZerk.jpg
 
Back
Top