-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Valve Cover Gasket Silicone Adhesive
- Thread starter Goldie
- Start date
-
- Tags
- valve cover
Share this page
Offline
A bit more in cost, but this stuff is excellent, IMHO. Cure time is 24 hours, so a bit of patience is required.
HondabondHT
HondabondHT
Bob_Spidell
Yoda
Offline
I'm not familiar with this product, but it looks like good stuff. Just be careful, some of the 'Right Stuff-type' sealants are high-strength adhesive; you might end up having to chisel your valve cover off.
AUSMHLY
Yoda
Offline
I'm using a silicone gasket by gasket innovation. It seals nicely and it's reusable.
mossmotors.com
Silicone Valve Cover Gaskets by Gasket Innovations
Silicone Valve Cover Gaskets by Gasket Innovations
TONTONGUIGUI
Freshman Member
Offline
Using silicone one with DIRKO ht ... cure 48 h to be efficient
Healey Nut
Luke Skywalker
Offline
High temp silicone sealant to glue the gasket to the valve cover . Hold it all in place with masking tape while it sets up 24hrs . No sealant on the gasket to head face needed .