-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Valve Cover Gasket Silicone Adhesive
- Thread starter Goldie
- Start date
-
- Tags
- valve cover
Share this page
Offline
A bit more in cost, but this stuff is excellent, IMHO. Cure time is 24 hours, so a bit of patience is required.
HondabondHT
HondabondHT
Bob_Spidell
Yoda
Offline
I'm not familiar with this product, but it looks like good stuff. Just be careful, some of the 'Right Stuff-type' sealants are high-strength adhesive; you might end up having to chisel your valve cover off.
AUSMHLY
Yoda
Offline
I'm using a silicone gasket by gasket innovation. It seals nicely and it's reusable.
mossmotors.com
Silicone Valve Cover Gaskets by Gasket Innovations
Silicone Valve Cover Gaskets by Gasket Innovations
mossmotors.com
TONTONGUIGUI
Freshman Member
Offline
Using silicone one with DIRKO ht ... cure 48 h to be efficient
Healey Nut
Luke Skywalker
Offline
High temp silicone sealant to glue the gasket to the valve cover . Hold it all in place with masking tape while it sets up 24hrs . No sealant on the gasket to head face needed .