-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 TR6 rear pinion seal
- Thread starter edkap2002
- Start date
Share this page
Offline
I have no tr6 experience, but I have removed many by taking the flange off (be sure to mark the parts and count turns for reassembly) and sticking a stout screw driver between the pinion and seal and then under one side of the seal to pry out the old seal.
Bob
Bob
Geo Hahn
Yoda
Offline
This is what I used to pulled the seal on a TR4, TR3A and a Big Healey...
www.harborfreight.com
Don't forget to drain the diff first. Or don't... and it will be self-draining in that case.
Seal Puller with 2 Tips
Amazing deals on this Seal Puller W/ 2 Tips at Harbor Freight. Quality tools & low prices.
www.harborfreight.com
Don't forget to drain the diff first. Or don't... and it will be self-draining in that case.