• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 TR6 rear pinion seal

Share this page

OP
edkap2002

edkap2002

Senior Member
Silver
Offline
Is it possible to replace differential pinion seal without removing the differential from the frame entirely? thanks
 
Sort by date Sort by votes
I have no tr6 experience, but I have removed many by taking the flange off (be sure to mark the parts and count turns for reassembly) and sticking a stout screw driver between the pinion and seal and then under one side of the seal to pry out the old seal.

Bob
 
Upvote 0 Downvote
This is what I used to pulled the seal on a TR4, TR3A and a Big Healey...

www.harborfreight.com

Seal Puller with 2 Tips

Amazing deals on this Seal Puller W/ 2 Tips at Harbor Freight. Quality tools & low prices.
www.harborfreight.com www.harborfreight.com

image_26983.jpg

Don't forget to drain the diff first. Or don't... and it will be self-draining in that case.
 
Upvote 0 Downvote
Back
Top