• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 Front Apron Removal Help

Share this page

Here's a trivia question (and thread drift) ... when did the brackets for the radiator support rods gain the slots visible in Don's photo ? They sure make it a lot easier to get those rods out ! (and TS13571L doesn't have them.)
 
My 1958 TR3A (TS 27489 LO) has no slots - only round holes for the rods that hold the radiator. Mabe they changed this at the same time as when they eliminated the removable panel on the RHS for the clutch/brake assembly.
 
SUCCESS!! I got all the bolts the first time, but the apron was simply tightly wedged between the fenders, and it was tightly mated across the top as well. Got it off tonight with a minimum of drama, although I'd sure hate to have to do it if I had a pristine paint job.

More pics at www.woundedduc.net/TR3

As always, thanks for all the help!


Mark
 
Don Elliott said:
My 1958 TR3A (TS 27489 LO) has no slots - only round holes for the rods that hold the radiator. Mabe they changed this at the same time as when they eliminated the removable panel on the RHS for the clutch/brake assembly.
Click to expand...


My 59 TR3 (TS 44408 L) has the removable panel on the right side, and also has the slotted brackets for the radiator support rods.
 
Mark,
Good deal. Your underbody looks good in that I don't see any repair work from minor/major collisions. Everything looks straight.
That's unusual actually as many did a fine exterior repair for shunts but kind of hammered the underbody into submission as no one would see it.
 
Could be, but I am convinced that there is not a hard change point for the dummy panel.

And TS39781LO has the slots and the dummy panel.
 
Back
Top